| Part Number : 5H2630 | Manufacturer : Caterpillar Inc | ||
| NSN : 3020-00-587-1484 (3020005871484) | |||
| Item Name : Gear Helical | CAGE Code : 11083 | ||
| NIIN : 00-587-1484 (005871484) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 5H2630, that of which is listed with the description Gear Helical; Manufactured by Caterpillar Inc and listed alongside the NSN 3020005871484, part number 5H2630 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 5H2630 | Manufacturer : Caterpillar Inc | ||
| NSN Number : 3020-00-587-1484 (3020005871484) | |||
| Item Name : Gear Helical | CAGE Code : 11083 | ||
| NIIN : 005871484 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 5H2630, that of which is listed with the description Gear Helical; Manufactured by Caterpillar Inc and listed alongside the NSN 3020005871484, part number 5H2630 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-587-1484 Item PartTypeName: GEAR,HELICAL | 3020 | 005871484 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5H2630 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSA | SPLINE QUANTITY | 6 BOTH ENDS |
| AGJS | PITCH DIAMETER | 2.0746 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 12 |
| ANTP | BORE STYLE | STRAIGHT SPLINE BOTH ENDS |
| CQFM | HARDNESS RATING | 59.0 ROCKWELL C MINIMUM OVERALL AND 64.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.5005 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 15.3077 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.3130 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 1.2995 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.2530 INCHES FIRST END |
| CWTR | HUB STYLE DESIGNATOR | PINNED FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 1.748 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | 1ST END COUNTERBORED,1.4375 IN. DIA BY 0.2187 IN. DP; 4 THDED HOLES ON HUB,0.3130 IN. DIA THD-24 UNF |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
