| Part Number : 4M9933 | Manufacturer : Caterpillar Inc | ||
| NSN : 3020-00-851-4716 (3020008514716) | |||
| Item Name : Gear Helical | CAGE Code : 11083 | ||
| NIIN : 00-851-4716 (008514716) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 4M9933, that of which is listed with the description Gear Helical; Manufactured by Caterpillar Inc and listed alongside the NSN 3020008514716, part number 4M9933 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 4M9933 | Manufacturer : Caterpillar Inc | ||
| NSN Number : 3020-00-851-4716 (3020008514716) | |||
| Item Name : Gear Helical | CAGE Code : 11083 | ||
| NIIN : 008514716 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 4M9933, that of which is listed with the description Gear Helical; Manufactured by Caterpillar Inc and listed alongside the NSN 3020008514716, part number 4M9933 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-851-4716 Item PartTypeName: GEAR,HELICAL | 3020 | 008514716 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 4M9933 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CQFM | HARDNESS RATING | 77.0 ROCKWELL C MINIMUM OVERALL AND 81.0 ROCKWELL C MAXIMUM OVERALL |
| CWTX | HUB NOMINAL DIAMETER | 3.500 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | 45 DEG 3.156 IN. DIA COUNTERSINK IN BORE ON 1ST END,LETTER B STAMPED ON CENTER LINE OF TOOTH 73 DEG 5 MIN 54 SEC CCW FROM CENTER LINE OF KEYWAY,LETTER C STAMPED ON CENTERLINE OF TOOTH 130 DEG 54 MIN 6 SEC CW FROM CENTER LINE OF KEYWAY |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
| AAQL | BODY STYLE | PLAIN,SOLID |
| AGJS | PITCH DIAMETER | 4.2000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 40 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 4.400 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 17.7528 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.314 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.750 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 2.566 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.189 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 1.385 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
