| Part Number : 6G607 | Manufacturer : Caterpillar Inc | ||
| NSN : 5315-01-169-8340 (5315011698340) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 11083 | ||
| NIIN : 01-169-8340 (011698340) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 02382 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 6G607, that of which is listed with the description Pin Grooved Headed; Manufactured by Caterpillar Inc and listed alongside the NSN 5315011698340, part number 6G607 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 6G607 | Manufacturer : Caterpillar Inc | ||
| NSN Number : 5315-01-169-8340 (5315011698340) | |||
| Item Name : Pin Grooved Headed | CAGE Code : 11083 | ||
| NIIN : 011698340 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 6G607, that of which is listed with the description Pin Grooved Headed; Manufactured by Caterpillar Inc and listed alongside the NSN 5315011698340, part number 6G607 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-169-8340 Item PartTypeName: PIN,GROOVED,HEADED | 5315 | 011698340 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1243240 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| ABMZ | DIAMETER | 76.51 MILLIMETERS MINIMUM AND 76.63 MILLIMETERS MAXIMUM |
| ABNZ | EFFECTIVE LENGTH | 44.0 MILLIMETERS NOMINAL |
| ABPA | UNDERCUT DIAMETER | 72.57 MILLIMETERS NOMINAL |
| ABPB | UNDER HEAD LENGTH | 151.0 MILLIMETERS NOMINAL |
| ABPE | UNDERCUT RADIUS | 12.0 MILLIMETERS MINIMUM AND 14.0 MILLIMETERS MAXIMUM |
| ABRB | HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| ABRC | FIRST HOLE DIAMETER | 6.0 MILLIMETERS NOMINAL |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 94.0 MILLIMETERS NOMINAL |
| ANEE | GRIP LENGTH | 57.0 MILLIMETERS NOMINAL |
| CQFM | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM SHANK |
| CRMG | FIRST END TAPER ANGLE | 20.0 DEGREES NOMINAL |
| CRRG | PIN HEAD DIAMETER | 89.05 MILLIMETERS MINIMUM AND 89.55 MILLIMETERS MAXIMUM |
| CSYM | SURFACE FINISH | 0.80 MICRONS SHANK END |
| CSYM | SURFACE FINISH | 1.6 MICRONS HEAD OUTSIDE DIAMETER |
| FEAT | SPECIAL FEATURES | 6.0 MM DIA HOLE ON SHAFT IS 21.0 MM MIN AND 24.0 MM MAX DEEP;TWO HOLES ON HEAD BEARING SURFACE ARE 11.0 MM DIA AND 32.0 MM DEEP AND ARE TAPPED 0.500 IN. 13-2B UNC; ONE HOLE ON HEAD BEARING SURFACE IS 8.5 MM MIN DIA AND 9.1 MM MAX DIA AND 95 |
| HGTH | HEIGHT | 32.0 MILLIMETERS MINIMUM AND 34.0 MILLIMETERS MAXIMUM |
| MATT | MATERIAL | STEEL COMP 1045 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 1E361,FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
