| Part Number : 13230E3523 | Manufacturer : Cecom Lr Center | ||
| NSN : 6105-01-469-2132 (6105014692132) | |||
| Item Name : Motor Alternating Current | CAGE Code : 97403 | ||
| NIIN : 01-469-2132 (014692132) | |||
| FSC Code : 6105 Motors Electrical | |||
| FSG Code : 61 Electric Wire and Power and Distribution Equipment | |||
| INC Code : 00530 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 13230E3523, that of which is listed with the description Motor Alternating Current; Manufactured by Cecom Lr Center and listed alongside the NSN 6105014692132, part number 13230E3523 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 13230E3523 | Manufacturer : Cecom Lr Center | ||
| NSN Number : 6105-01-469-2132 (6105014692132) | |||
| Item Name : Motor Alternating Current | CAGE Code : 97403 | ||
| NIIN : 014692132 | |||
| FSC CODE : 6105 Motors Electrical | |||
Thank you for taking an interest in part number 13230E3523, that of which is listed with the description Motor Alternating Current; Manufactured by Cecom Lr Center and listed alongside the NSN 6105014692132, part number 13230E3523 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 6105-01-469-2132 Item PartTypeName: MOTOR,ALTERNATING CURRENT | 6105 | 014692132 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 12027 | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MRC | Decoded Requirement | Clear Text Reply |
| AGAV | End Item Identification | FORCE PROVIDER (USED ON: 4120-01-413-7835) |
| ABRR | Keyway Width | 0.188 INCHES MINIMUM SINGLE END AND 0.190 INCHES MAXIMUM SINGLE END |
| AKCT | Shaft Rotation Direction | COUNTERCLOCKWISE SINGLE END |
| AAJV | Overall Width | 8.188 INCHES |
| ABWV | Shaft Diameter | 0.625 INCHES NOMINAL SINGLE END |
| ANPZ | Inclosure Feature | FUNGUS PROOF AND WATERPROOF |
| CWDT | Nominal Center To Center Distance Between Mounting Facilities Parallel To Length | 5.000 INCHES |
| CXCY | Part Name Assigned By Controlling Agency | ITEM NAME: MOTOR,EVAPORATOR |
| CWDM | Shaft Center To Mounting Surface Distance | 3.500 INCHES SINGLE END |
| TTQY | Terminal Type And Quantity | 5 WIRE LEAD AND 5 SOLDERLESS LUG |
| AXHR | Mounting Facility Type And Quantity | 4 UNTHREADED HOLE |
| AFYS | Keyway Length | 1.440 INCHES NOMINAL SINGLE END |
| CWCS | Length Of Shaft From Housing | 2.000 INCHES SINGLE END |
| AAJT | Overall Height | 6.750 INCHES |
| FEAT | Special Features | THE MOTORS SHALL BE DESIGNED AND TESTED IAW: NATIONAL ELECTRIC MANUFACTURERS ASSOCIATION(NEMA) PUBLICATION NO. MG1 AND OTHER REQUIREMENTS AS SPECIFIED ON THIS DRAWING // THE MOTOR SHALL HAVE 3 WIRES, PHASE A, B AND C, 84"+-1, 12 AWG, WITH TERMINAL LUGS, MS25036-156 AND 2 WIRES, P1 AND P2, 72"+-1, 18 AWG, WITH TERMINAL LUGS, MS25036-101 // SPECIFICATIONS: A. VOLTAGE(208/230 VOLT +10% -5%) X B. FREQUENCY(50/60 HZ +-5%) X C. PHASE(3) X D. WEIGHT(40 LBS MAX) X E. HORSEPOWER AND SPEED(2 BRAKE HORSEPOWER AT 1725 RPM MIN., CONTINUOUS RATING) X F. EFFICIENCY(75% MIN) |
| CWFY | Nominal Center To Center Distance Between Mounting Facilities Parallel To Width | 4.875 INCHES |
| AAJU | Overall Length | 13.500 INCHES |
| ABRV | Keyway Depth | 0.092 INCHES MINIMUM SINGLE END AND 0.094 INCHES MAXIMUM SINGLE END |
| CWHZ | Shaft End Characteristic | A9 SINGLE STYLE SINGLE END |
| AXGY | Mounting Method | FIXED BASE AND FACE |
| AKPS | Duty Cycle | CONTINUOUS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
