| Part Number : 13015980 | Manufacturer : Century Fasteners Corp | ||
| NSN : 3110-01-610-3791 (3110016103791) | |||
| Item Name : Bearing Ball Thrust | CAGE Code : 7P578 | ||
| NIIN : 01-610-3791 (016103791) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00019 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 13015980, that of which is listed with the description Bearing Ball Thrust; Manufactured by Century Fasteners Corp and listed alongside the NSN 3110016103791, part number 13015980 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 13015980 | Manufacturer : Century Fasteners Corp | ||
| NSN Number : 3110-01-610-3791 (3110016103791) | |||
| Item Name : Bearing Ball Thrust | CAGE Code : 7P578 | ||
| NIIN : 016103791 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 13015980, that of which is listed with the description Bearing Ball Thrust; Manufactured by Century Fasteners Corp and listed alongside the NSN 3110016103791, part number 13015980 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-610-3791 Item PartTypeName: BEARING,BALL,THRUST | 3110 | 016103791 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| INA WI | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKW | OVERALL HEIGHT | 0.6200 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZA | ALIGNMENT TYPE | RIGID |
| CTFZ | STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR THRUST BEARINGS |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BEARING,THRUST |
| FEAT | SPECIAL FEATURES | ROLLER BEARING IS HEAT TREATED THROUGH HARDENED ROCKWELL C58 TO C64; SURFACE FINISH IAW CID A-A-52491 |
| STYL | STYLE DESIGNATOR | GROOVED RACE SURFACE |
| SUPP | SUPPLEMENTARY FEATURES | BASIC STATIC LOAD RATING AT 5300 LBS AND DYNMAIC LOAD RATING AT 1184 LBS |
| MATT | MATERIAL | STEEL COMP E51100 OR STEEL COMP E52100 OVERALL |
| AGAV | END ITEM IDENTIFICATION | |
| AGZQ | THRUST DIRECTIONAL CAPABILITY DESIGNATION | SINGLE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE-AMS-STD-66 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AGWK | LARGEST BORE DIAMETER | 1.0313 INCHES MINIMUM |
| AGYE | SURFACE FINISH | GROUND |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.7790 INCHES MINIMUM AND 1.7810 INCHES MAXIMUM |
| AGWJ | BORE SMALLEST DIAMETER | 1.0040 INCHES MINIMUM AND 1.0060 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
