| Part Number : 938115 | Manufacturer : Chrysler Corp | ||
| NSN : 2530-00-410-9558 (2530004109558) | |||
| Item Name : Cylinder Assembly Hydraulic Brak | CAGE Code : 99343 | ||
| NIIN : 00-410-9558 (004109558) | |||
| FSC Code : 2530 Vehicular Brake Steering Axle Wheel and Track Components | |||
| FSG Code : 25 Vehicular Equipment Components | |||
| INC Code : 10862 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 938115, that of which is listed with the description Cylinder Assembly Hydraulic Brak; Manufactured by Chrysler Corp and listed alongside the NSN 2530004109558, part number 938115 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3 v fastener co inc
CAGE Code: 1ER65 |
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
|
3d robotics llc
CAGE Code: 64TY6 |
14 dock drive inc
CAGE Code: 14677 |
|
3e technologies international inc
CAGE Code: 1DEZ4 |
5s components inc
CAGE Code: 1LNJ8 |
|
3d pep
CAGE Code: FB830 |
3d energy pty ltd
CAGE Code: Z0UA3 |
|
2709th af vehicle control group
CAGE Code: 10994 |
2 s 2 inc
CAGE Code: 5A8X0,787R6 |
|
10zig technology inc
CAGE Code: 49E04 |
1 source electronics inc
CAGE Code: 551K1 |
|
25 canadian forces supply depot
CAGE Code: 35637 |
2 mb distribution
CAGE Code: FAH01 |
|
4 r electro systems
CAGE Code: 1T600 |
| Part Number : 938115 | Manufacturer : Chrysler Corp | ||
| NSN Number : 2530-00-410-9558 (2530004109558) | |||
| Item Name : Cylinder Assembly Hydraulic Brak | CAGE Code : 99343 | ||
| NIIN : 004109558 | |||
| FSC CODE : 2530 Vehicular Brake Steering Axle Wheel and Track Components | |||
Thank you for taking an interest in part number 938115, that of which is listed with the description Cylinder Assembly Hydraulic Brak; Manufactured by Chrysler Corp and listed alongside the NSN 2530004109558, part number 938115 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2530-00-410-9558 Item PartTypeName: CYLINDER ASSEMBLY,HYDRAULIC BRAK | 2530 | 004109558 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3196552 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | IRON,CAST |
| ABDR | MOUNTING PROVISION | THREADED MOUNTING HOLES |
| ABKW | OVERALL HEIGHT | 1.469 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.047 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.000 INCHES NOMINAL |
| ADAR | BODY OUTSIDE DIAMETER | 1.312 INCHES NOMINAL |
| AJFY | SEAT ANGLE IN DEG | 42.0 SINGLE PORT |
| AKBM | MOUNTING FACILITY THREAD CLASS | 2B |
| AKBN | MOUNTING FACILITY THREAD DIRECTION | RIGHT-HAND |
| AMQZ | COMPRESSED LENGTH | 2.938 INCHES NOMINAL |
| ASBP | BORE TYPE | STRAIGHT |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| BBJX | MOUNTING POSITION | RIGHT |
| CBBL | FEATURES PROVIDED | BLEEDER VALVES AND RUBBER BOOT |
| CDTD | MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNC |
| CDTF | MOUNTING FACILITY THREAD DIAMETER | 0.250 INCHES NOMINAL |
| CDTG | MOUNTING FACILITY THREAD QUANTITY PER INCH | 20 |
| CKSD | DESIGN CHARACTERISTICS | SINGLE ACTING SINGLE CYLINDER |
| CLML | MOUNTING TYPE AND LOCATION | FLANGE CENTER SECTION |
| CLMN | MOUNTING FACILITY THREAD LENGTH | 0.344 INCHES NOMINAL |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 1.250 INCHES NOMINAL |
| CLMS | PORT LOCATION AND QUANTITY | 1 CENTER SECTION |
| CLMT | PORT STYLE | INVERTED FLARE SINGLE PORT |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNF SINGLE PORT |
| CLMX | PORT THREAD DIAMETER | 0.375 INCHES NOMINAL SINGLE PORT |
| CLMY | PORT THREAD QUANTITY PER INCH | 24 SINGLE PORT |
| CLNB | PORT THREAD CLASS | 2B SINGLE PORT |
| CLND | BLEEDING FEATURE QUANTITY | 1 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
