| Part Number : 172705 | Manufacturer : Cincinnati Machine Co | ||
| NSN : 3110-01-131-2990 (3110011312990) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 12356 | ||
| NIIN : 01-131-2990 (011312990) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30213 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 172705, that of which is listed with the description Bearing Ball Duplex; Manufactured by Cincinnati Machine Co and listed alongside the NSN 3110011312990, part number 172705 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 172705 | Manufacturer : Cincinnati Machine Co | ||
| NSN Number : 3110-01-131-2990 (3110011312990) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 12356 | ||
| NIIN : 011312990 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 172705, that of which is listed with the description Bearing Ball Duplex; Manufactured by Cincinnati Machine Co and listed alongside the NSN 3110011312990, part number 172705 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-131-2990 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 011312990 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 172705 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 28.00 MILLIMETERS NOMINAL |
| ABXV | BORE DIAMETER | 35.00 MILLIMETERS NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 62.00 MILLIMETERS NOMINAL |
| ADZG | LUBRICATION MATERIAL | GREASE |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZJ | BEARING PRELOAD DESIGNATION | LIGHT |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| CTHQ | BEARING PRELOAD RATING | 20.0 POUNDS NOMINAL |
| FEAT | SPECIAL FEATURES | HPAIR OF BEARINGS W/FACES GROUND FOR UNIVERSAL DUPLEX MTG; COUNTERBORED INNER RING AND DEEP GROOVE OUTER RING; INWARD CONVERGENT; SEAL LOCATED ON SIDE OPPOSITE LOW SHOULDER OF INNER RING,1 EACH BEARING |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | BEACON 325,FSCM 29700 MFR REF SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC PHENOLIC RETAINER |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
