| Part Number : P815-2A | Manufacturer : Clark And Associates Inc | ||
| NSN : 5365-01-274-6121 (5365012746121) | |||
| Item Name : Shim | CAGE Code : 0B201 | ||
| NIIN : 01-274-6121 (012746121) | |||
| FSC Code : 5365 Bushings Rings Shims and Spacers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 20349 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: P8152A | |||
Thank you for taking an interest in part number P815-2A, that of which is listed with the description Shim; Manufactured by Clark And Associates Inc and listed alongside the NSN 5365012746121, part number P815-2A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
4 ld inc
CAGE Code: 0ACW5 |
5dt inc
CAGE Code: 3BPF1 |
|
4 m company inc
CAGE Code: 1K407,57268 |
3dbm co inc
CAGE Code: 31791,62874 |
|
17th st photo supply inc
CAGE Code: 1VV61 |
4 star hose and supply inc
CAGE Code: 079J5 |
|
20th century fiberglass
CAGE Code: 80241 |
526th emxs fabrication
CAGE Code: 69XG4 |
|
360 tents l l c
CAGE Code: 4CT45 |
3 l filters ltd
CAGE Code: 37941 |
|
184th air refueling wing
CAGE Code: 3EP27 |
28eme groupe geographique
CAGE Code: FAR17 |
|
3m company health care mfg
CAGE Code: 04515 |
1343080 alberta ltd
CAGE Code: L0796 |
|
3m co engineering document systems
CAGE Code: 1BY21 |
| Part Number : P815-2A | Manufacturer : Clark And Associates Inc | ||
| NSN Number : 5365-01-274-6121 (5365012746121) | |||
| Item Name : Shim | CAGE Code : 0B201 | ||
| NIIN : 012746121 | |||
| FSC CODE : 5365 Bushings Rings Shims and Spacers | |||
Thank you for taking an interest in part number P815-2A, that of which is listed with the description Shim; Manufactured by Clark And Associates Inc and listed alongside the NSN 5365012746121, part number P815-2A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5365-01-274-6121 Item PartTypeName: SHIM | 5365 | 012746121 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| P815-2A | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 1.350 INCHES MINIMUM AND 1.410 INCHES MAXIMUM |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.710 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.710 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.290 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| AECS | BOLT HOLE QUANTITY | 4 |
| AGAV | END ITEM IDENTIFICATION | ROTARY ACTUATOR/INSTALLATION,F-16C/D COMMON |
| CQCF | CONSTRUCTION | ONE-PIECE |
| FEAT | SPECIAL FEATURES | TAB 0.190 IN. MIN AND 0.210 IN. MAX ALONG LENGTH AND 1.350 IN. MIN AND 1.410 IN. MAX ALONG WIDTH WITH 0.06 IN. BEND,30 DEGREE RADIUS |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
