| Part Number : P815-5E | Manufacturer : Clark And Associates Inc | ||
| NSN : 5365-01-279-0824 (5365012790824) | |||
| Item Name : Spacer Plate | CAGE Code : 0B201 | ||
| NIIN : 01-279-0824 (012790824) | |||
| FSC Code : 5365 Bushings Rings Shims and Spacers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 26979 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: P8155E | |||
Thank you for taking an interest in part number P815-5E, that of which is listed with the description Spacer Plate; Manufactured by Clark And Associates Inc and listed alongside the NSN 5365012790824, part number P815-5E is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3 v fastener co inc
CAGE Code: 1ER65 |
3m deutschland gmbh
CAGE Code: D2607 |
|
3m purification pty limited
CAGE Code: Z5295 |
1st solutions inc
CAGE Code: 0FY35,0TU77 |
|
3m australia pty ltd
CAGE Code: Z0040,ZA992,ZD110,ZW687 |
20 10 products inc
CAGE Code: 09KC9 |
|
184th air refueling wing
CAGE Code: 3EP27 |
2709th af vehicle control group
CAGE Code: 10994 |
|
3m co abrasive systems division
CAGE Code: 078Z1 |
3gen grup trafik ltd
CAGE Code: TB427 |
|
1 nation electronics llc
CAGE Code: 1XP36 |
3m medical imaging
CAGE Code: 0ZRE5 |
|
3gen corporation
CAGE Code: 3SPS3 |
3d energy pty ltd
CAGE Code: Z0UA3 |
|
2connect it b v
CAGE Code: HG221 |
| Part Number : P815-5E | Manufacturer : Clark And Associates Inc | ||
| NSN Number : 5365-01-279-0824 (5365012790824) | |||
| Item Name : Spacer Plate | CAGE Code : 0B201 | ||
| NIIN : 012790824 | |||
| FSC CODE : 5365 Bushings Rings Shims and Spacers | |||
Thank you for taking an interest in part number P815-5E, that of which is listed with the description Spacer Plate; Manufactured by Clark And Associates Inc and listed alongside the NSN 5365012790824, part number P815-5E is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5365-01-279-0824 Item PartTypeName: SPACER,PLATE | 5365 | 012790824 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| P815-5E | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 1.420 INCHES MINIMUM AND 1.480 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.830 INCHES MINIMUM AND 0.890 INCHES MAXIMUM |
| ADUM | OVERALL THICKNESS | 0.030 INCHES MINIMUM AND 0.034 INCHES MAXIMUM |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.800 INCHES MINIMUM AND 0.860 INCHES MAXIMUM |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.400 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.290 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | RETROFIT ECP 1257 F-16A-D |
| FEAT | SPECIAL FEATURES | ONE HOLE 0.240 IN. MIN AND 0.260 IN. MAX ON ONE END AND ONE HOLE 0.302 IN. MIN AND 0.322 IN. MAX ON OPPOSITE END; TAB 0.190 IN. MIN AND 0.210 IN. MAX ALONG LENGTH AND 0.830 IN. MIN AND 0.890 IN. MAX ALONG WIDTH WITH 0.06 IN. BEND,30 DEGREE |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | RECTANGULAR |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
