1 items in cart.

 13F026-00-0P

INSTANT RFQ
INSTANT RFQ
Enter List

D43-4X part number of Clarostat Sensors And Controls - Order Now!

Part Number : D43-4X Manufacturer : Clarostat Sensors And Controls
NSN : 5905-00-163-3857 (5905001633857)
Item Name : Resistor Variable Wire Wound Non CAGE Code : 12697
NIIN : 00-163-3857  (001633857)
FSC Code : 5905 Resistors
FSG Code : 59 Electrical and Electronic Equipment Components
INC Code : 37406
NCB Code : 00 Country : USA
Alternate P/N:  D434X

Thank you for taking an interest in part number D43-4X, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905001633857, part number D43-4X is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Recently Viewed Parts
AP12-50BLK
Mcm
RFQ
ON516252-1
RFQ

D43-4X part number of Clarostat Sensors And Controls - Order Now!

Part Number : D43-4X Manufacturer : Clarostat Sensors And Controls
NSN Number : 5905-00-163-3857 (5905001633857)
Item Name : Resistor Variable Wire Wound Non CAGE Code : 12697
NIIN : 001633857
FSC CODE : 5905 Resistors

Thank you for taking an interest in part number D43-4X, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905001633857, part number D43-4X is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number D43-4X

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number D43-4X with NSN 5905-00-163-3857, 5905001633857

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-163-3857

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050016338570NB
CIICHCCESDPMICCriticalityENAC
UBU
Part NumberISCRNVCRNCCHCCMSDSSADC
29-404C95

Characteristics Data of NSN 5905-00-163-3857, 5905001633857

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY2
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH2.438 INCHES NOMINAL
ABPMBODY DIAMETER1.125 INCHES NOMINAL
ABWVSHAFT DIAMETER0.187 INCHES MINIMUM AND 0.264 INCHES MAXIMUM
ABXFSHAFT LENGTH0.375 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
ADAPMOUNTING BUSHING LENGTH0.375 INCHES NOMINAL
ADAQBODY LENGTH1.188 INCHES NOMINAL
ADASBODY INSIDE DIAMETER0.187 INCHES NOMINAL
ADAVOVERALL DIAMETER1.562 INCHES NOMINAL
AEDXSHAFT STYLEROUND,HOLLOWED
AEFDACTUATOR TYPEDUAL CONCENTRIC
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION280.0 MAXIMUM
AEFKMAXIMUM STARTING TORQUE6.00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE5.00 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE128.00 INCH-OUNCES
AEFNNONTURN DEVICE LOCATIONAT 9 OCLOCK
AEFPNONTURN DEVICE RADIUS0.531 INCHES NOMINAL
AGAVEND ITEM IDENTIFICATIONTICONDEROGA CLASS CG (47),YELLOWSTONE CLASS AD-41,EMORY S. LAND CLASS AS.
AJYNSCREW THREAD DIAMETER0.375 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODSTANDARD BUSHING
CQCCELECTRICAL RESISTANCE PER SECTION4.0 KILOHMS 1ST SECTION
CQCCELECTRICAL RESISTANCE PER SECTION40.0 OHMS 2ND SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG300.0 NOMINAL
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER105.0 ALL SECTIONS
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 ALL SECTIONS
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR ALL SECTIONS
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 2ND SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CRTLCRITICALITY CODE JUSTIFICATIONFEAT
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 ALL SECTIONS
FEATSPECIAL FEATURESWEAPON SYSTEM ESSENTIAL
TTQYTERMINAL TYPE AND QUANTITY6 TAB,SOLDER LUG

Frequently Asked Questions (FAQ): D43-4X NSN Part

What Type of Item Is Part Number D43-4X?
  • Part Number D43-4X is an "Resistor Variable Wire Wound Non" manufactured by Clarostat Sensors And Controls Managed with the NSN 5905-00-163-3857. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number D43-4X?
  • Resistor Variable Wire Wound Non To receive a competitive quote for items with the part number D43-4X, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 12697 Important When Purchasing Part Number D43-4X?
  • CAGE Code 12697 signifies Clarostat Sensors And Controls Managed as the manufacturer of Part Number D43-4X, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5905-00-163-3857 Paired with Part Number D43-4X?
  • Part Number D43-4X is the identification assigned to the item by Clarostat Sensors And Controls Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5905-00-163-3857 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up