Part Number : CM39702 | Manufacturer : Clarostat Sensors And Controls | ||
NSN : 5905-00-488-8027 (5905004888027) | |||
Item Name : Resistor Variable Nonwire Wound | CAGE Code : 12697 | ||
NIIN : 00-488-8027 (004888027) | |||
FSC Code : 5905 Resistors | |||
FSG Code : 59 Electrical and Electronic Equipment Components | |||
INC Code : 37405 | |||
NCB Code : 00 | Country : USA |
Thank you for taking an interest in part number CM39702, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905004888027, part number CM39702 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : CM39702 | Manufacturer : Clarostat Sensors And Controls | ||
NSN Number : 5905-00-488-8027 (5905004888027) | |||
Item Name : Resistor Variable Nonwire Wound | CAGE Code : 12697 | ||
NIIN : 004888027 | |||
FSC CODE : 5905 Resistors |
Thank you for taking an interest in part number CM39702, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905004888027, part number CM39702 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5905-00-488-8027 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 004888027 | 0 | N | B | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | B | U | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
311-1393-00 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAPN | SECTION QUANTITY | 2 |
AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
ABPA | UNDERCUT DIAMETER | 0.109 INCHES NOMINAL |
ABPM | BODY DIAMETER | 0.625 INCHES NOMINAL |
ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
ABXF | SHAFT LENGTH | 0.656 INCHES MINIMUM AND 0.953 INCHES MAXIMUM |
ADAP | MOUNTING BUSHING LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
ADAQ | BODY LENGTH | 0.383 INCHES NOMINAL |
ADAV | OVERALL DIAMETER | 0.875 INCHES NOMINAL |
AEDX | SHAFT STYLE | ROUND,STEPPED |
AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
AEFP | NONTURN DEVICE RADIUS | 0.312 INCHES NOMINAL |
AGQL | UNDERCUT LENGTH | 0.477 INCHES NOMINAL |
AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
AXGY | MOUNTING METHOD | STANDARD BUSHING |
CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS 1ST SECTION AND 5.0 MEGOHMS 2ND SECTION |
CQPH | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK |
CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR ALL SECTIONS |
CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 ALL SECTIONS |
CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB,SOLDER LUG |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote