1 items in cart.

 13F026-00-0P

INSTANT RFQ
INSTANT RFQ
Enter List

58-25K part number of Clarostat Sensors And Controls - Order Now!

Part Number : 58-25K Manufacturer : Clarostat Sensors And Controls
NSN : 5905-00-557-9474 (5905005579474)
Item Name : Resistor Variable Wire Wound Non CAGE Code : 12697
NIIN : 00-557-9474  (005579474)
FSC Code : 5905 Resistors
FSG Code : 59 Electrical and Electronic Equipment Components
INC Code : 37406
NCB Code : 00 Country : USA
Alternate P/N:  5825K

Thank you for taking an interest in part number 58-25K, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905005579474, part number 58-25K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Part 58-25K With Different Manufacturers

58-25K

58-25K

Recently Viewed Parts
BB101MAU-TR
RFQ
2YG-00361KIT
RFQ

58-25K part number of Clarostat Sensors And Controls - Order Now!

Part Number : 58-25K Manufacturer : Clarostat Sensors And Controls
NSN Number : 5905-00-557-9474 (5905005579474)
Item Name : Resistor Variable Wire Wound Non CAGE Code : 12697
NIIN : 005579474
FSC CODE : 5905 Resistors

Thank you for taking an interest in part number 58-25K, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905005579474, part number 58-25K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number 58-25K

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number 58-25K with NSN 5905-00-557-9474, 5905005579474

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-557-9474

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050055794740NB
CIICHCCESDPMICCriticalityENAC
UBU
Part NumberISCRNVCRNCCHCCMSDSSADC
2100-000831CA

Characteristics Data of NSN 5905-00-557-9474, 5905005579474

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH1.374 INCHES MINIMUM AND 1.686 INCHES MAXIMUM
ABPMBODY DIAMETER1.500 INCHES MINIMUM AND 1.710 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
ABXFSHAFT LENGTH0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM
ADAPMOUNTING BUSHING LENGTH0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
ADAQBODY LENGTH0.530 INCHES MINIMUM AND 0.780 INCHES MAXIMUM
ADAVOVERALL DIAMETER2.135 INCHES MAXIMUM
AEDXSHAFT STYLEROUND,SLOTTED
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION280.0 MINIMUM AND 305.0 MAXIMUM
AEFKMAXIMUM STARTING TORQUE6.00 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE128.00 INCH-OUNCES
AEFNNONTURN DEVICE LOCATIONAT 9 OCLOCK
AEFPNONTURN DEVICE RADIUS0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM
AJYNSCREW THREAD DIAMETER0.375 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODSTANDARD BUSHING
CQCCELECTRICAL RESISTANCE PER SECTION25.000 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG280.0 MINIMUM AND 305.0 MAXIMUM
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER105.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS4.0 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
TESTTEST DATA DOCUMENT81349-MIL-R-19 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTING
TTQYTERMINAL TYPE AND QUANTITY3 TAB,SOLDER LUG
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-R-19/3 GOVERNMENT SPECIFICATION

Frequently Asked Questions (FAQ): 58-25K NSN Part

What Type of Item Is Part Number 58-25K?
  • Part Number 58-25K is an "Resistor Variable Wire Wound Non" manufactured by Clarostat Sensors And Controls Managed with the NSN 5905-00-557-9474. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number 58-25K?
  • Resistor Variable Wire Wound Non To receive a competitive quote for items with the part number 58-25K, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 12697 Important When Purchasing Part Number 58-25K?
  • CAGE Code 12697 signifies Clarostat Sensors And Controls Managed as the manufacturer of Part Number 58-25K, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5905-00-557-9474 Paired with Part Number 58-25K?
  • Part Number 58-25K is the identification assigned to the item by Clarostat Sensors And Controls Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5905-00-557-9474 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up