1 items in cart.

 13F026-00-0P

INSTANT RFQ
INSTANT RFQ
Enter List

D49M1K1K part number of Clarostat Sensors And Controls - Order Now!

Part Number : D49M1K1K Manufacturer : Clarostat Sensors And Controls
NSN : 5905-00-968-4542 (5905009684542)
Item Name : Resistor Variable Wire Wound Non CAGE Code : 12697
NIIN : 00-968-4542  (009684542)
FSC Code : 5905 Resistors
FSG Code : 59 Electrical and Electronic Equipment Components
INC Code : 37406
NCB Code : 00 Country : USA

Thank you for taking an interest in part number D49M1K1K, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905009684542, part number D49M1K1K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Recently Viewed Parts
163A16619X
RFQ

D49M1K1K part number of Clarostat Sensors And Controls - Order Now!

Part Number : D49M1K1K Manufacturer : Clarostat Sensors And Controls
NSN Number : 5905-00-968-4542 (5905009684542)
Item Name : Resistor Variable Wire Wound Non CAGE Code : 12697
NIIN : 009684542
FSC CODE : 5905 Resistors

Thank you for taking an interest in part number D49M1K1K, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905009684542, part number D49M1K1K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number D49M1K1K

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number D49M1K1K with NSN 5905-00-968-4542, 5905009684542

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-968-4542

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050096845420N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
D49M1K1K225

Characteristics Data of NSN 5905-00-968-4542, 5905009684542

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY2
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH0.921 INCHES NOMINAL
ABPMBODY DIAMETER0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
ABXFSHAFT LENGTH0.437 INCHES MAXIMUM
ADAPMOUNTING BUSHING LENGTH0.375 INCHES MAXIMUM
ADAQBODY LENGTH0.453 INCHES MINIMUM AND 0.484 INCHES MAXIMUM
ADAVOVERALL DIAMETER1.063 INCHES NOMINAL
AEDXSHAFT STYLEROUND,SLOTTED
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION300.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE6.00 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE48.00 INCH-OUNCES
AEFNNONTURN DEVICE LOCATIONAT 9 OCLOCK
AEFPNONTURN DEVICE RADIUS0.312 INCHES MAXIMUM
AJYNSCREW THREAD DIAMETER0.250 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODLOCKING BUSHING
CQCCELECTRICAL RESISTANCE PER SECTION1.0 KILOHMS ALL SECTIONS
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG300.0 NOMINAL
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-45.0 TO 145.0 1ST SECTION
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-45.0 TO 145.0 2ND SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.1 FREE AIR 2ND SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.5 FREE AIR 1ST SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 1ST SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 2ND SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY6 TAB,SOLDER LUG

Frequently Asked Questions (FAQ): D49M1K1K NSN Part

What Type of Item Is Part Number D49M1K1K?
  • Part Number D49M1K1K is an "Resistor Variable Wire Wound Non" manufactured by Clarostat Sensors And Controls Managed with the NSN 5905-00-968-4542. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number D49M1K1K?
  • Resistor Variable Wire Wound Non To receive a competitive quote for items with the part number D49M1K1K, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 12697 Important When Purchasing Part Number D49M1K1K?
  • CAGE Code 12697 signifies Clarostat Sensors And Controls Managed as the manufacturer of Part Number D49M1K1K, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5905-00-968-4542 Paired with Part Number D49M1K1K?
  • Part Number D49M1K1K is the identification assigned to the item by Clarostat Sensors And Controls Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5905-00-968-4542 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up