| Part Number : JJCW97931 | Manufacturer : Clarostat Sensors And Controls | ||
| NSN : 5905-01-120-9041 (5905011209041) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 12697 | ||
| NIIN : 01-120-9041 (011209041) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37405 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number JJCW97931, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905011209041, part number JJCW97931 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : JJCW97931 | Manufacturer : Clarostat Sensors And Controls | ||
| NSN Number : 5905-01-120-9041 (5905011209041) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 12697 | ||
| NIIN : 011209041 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number JJCW97931, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905011209041, part number JJCW97931 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-120-9041 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 011209041 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 97931 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPA | UNDERCUT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.156 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 1.500 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.281 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.359 INCHES MAXIMUM |
| AEDQ | UNABLE TO DECODE | UNABLE TO DECODE AND UNABLE TO DECODE |
| AEDX | SHAFT STYLE | ROUND,STEPPED |
| AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
| AEFN | UNABLE TO DECODE | UNABLE TO DECODE |
| AEFP | NONTURN DEVICE RADIUS | 0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM |
| AGQL | UNDERCUT LENGTH | 0.500 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | UNABLE TO DECODE | UNABLE TO DECODE |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBBL | FEATURES PROVIDED | PANEL SEAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 ALL SECTIONS |
| CQPH | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.25 FREE AIR ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| FEAT | SPECIAL FEATURES | BOTH SHAFTS FLATTED |
| TEST | TEST DATA DOCUMENT | 10001-3178149 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB,SOLDER LUG |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
