Part Number : GD8376E | Manufacturer : Clarostat Sensors And Controls | ||
NSN : 5905-01-138-3179 (5905011383179) | |||
Item Name : Resistor Variable Nonwire Wound | CAGE Code : 12697 | ||
NIIN : 01-138-3179 (011383179) | |||
FSC Code : 5905 Resistors | |||
FSG Code : 59 Electrical and Electronic Equipment Components | |||
INC Code : 37405 | |||
NCB Code : 01 | Country : USA |
Thank you for taking an interest in part number GD8376E, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905011383179, part number GD8376E is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : GD8376E | Manufacturer : Clarostat Sensors And Controls | ||
NSN Number : 5905-01-138-3179 (5905011383179) | |||
Item Name : Resistor Variable Nonwire Wound | CAGE Code : 12697 | ||
NIIN : 011383179 | |||
FSC CODE : 5905 Resistors |
Thank you for taking an interest in part number GD8376E, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905011383179, part number GD8376E is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5905-01-138-3179 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 011383179 | N | A | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
A | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
GD8376 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAPN | SECTION QUANTITY | 2 |
AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
ABHP | OVERALL LENGTH | 1.906 INCHES NOMINAL |
ABPM | BODY DIAMETER | 0.500 INCHES NOMINAL |
ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
ABXF | SHAFT LENGTH | 1.000 INCHES NOMINAL |
ADAP | MOUNTING BUSHING LENGTH | 0.500 INCHES NOMINAL |
ADAQ | BODY LENGTH | 0.672 INCHES NOMINAL |
ADAV | OVERALL DIAMETER | 0.500 INCHES NOMINAL |
AEDX | SHAFT STYLE | ROUND,SLOTTED |
AEDZ | UNABLE TO DECODE | UNABLE TO DECODE |
AEFD | ACTUATOR TYPE | SINGLE SHAFT |
AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
APXH | UNABLE TO DECODE | UNABLE TO DECODE |
AXGY | MOUNTING METHOD | STANDARD BUSHING |
CBBL | FEATURES PROVIDED | PANEL SEAL AND SHAFT SEAL |
CXHN | SHAFT BEARING TYPE | BALL |
TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB,SOLDER LUG |
CBME | CUBIC MEASURE | 0.374 CUBIC INCHES |
CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS 1ST SECTION AND 1.000 KILOHMS 2ND SECTION |
CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 ALL SECTIONS |
CQTM | TERMINAL LOCATION | REAR-BOTTOM |
CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR ALL SECTIONS |
CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote