| Part Number : CM45002 | Manufacturer : Clarostat Sensors And Controls | ||
| NSN : 5905-01-234-3061 (5905012343061) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 12697 | ||
| NIIN : 01-234-3061 (012343061) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37405 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number CM45002, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905012343061, part number CM45002 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : CM45002 | Manufacturer : Clarostat Sensors And Controls | ||
| NSN Number : 5905-01-234-3061 (5905012343061) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 12697 | ||
| NIIN : 012343061 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number CM45002, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905012343061, part number CM45002 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-234-3061 Item Description: RESISTOR,VARIABLE,NONWIRE WOUND, | 5905 | 012343061 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CM45002 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABNC | FLAT HEIGHT | 0.220 INCHES MAXIMUM |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| ADAV | III OVERALL DIAMETER | 1.094 INCHES NOMINAL |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| SR-1 | MFR SOURCE CONTROLLING REFERENCE | 380-10035-503 |
| APXH | TERMINAL LOCATION | REAR-BOTTOM |
| ABHP | III OVERALL LENGTH | 1.941 INCHES NOMINAL |
| CBME | III CUBIC MEASURE | 1.824 CUBIC INCHES |
| AEDX | SHAFT STYLE | ROUND, FLATTED |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
| AEEA | SWITCH TYPE | ROTARY |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 117.0 |
| ABPM | BODY DIAMETER | 1.094 INCHES NOMINAL |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| ABXF | SHAFT LENGTH | 0.910 INCHES NOMINAL |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED |
| ZZZK | SPECIFICATION/STANDARD DATA | 82918-380-10035 MANUFACTURERS SOURCE CONTROL |
| TEST | TEST DATA DOCUMENT | 82918-380-10035 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CBBL | FEATURES PROVIDED | PANEL SEAL AND SHAFT SEAL AND SWITCH |
| AEFK | MAXIMUM STARTING TORQUE | 4.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 4.00 INCH-OUNCES |
| ABNB | FIRST FLAT LENGTH | 0.438 INCHES MINIMUM |
| AEFM | MAXIMUM STOP TORQUE | 12.00 INCH-OUNCES |
| AEFP | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL |
| AEFN | NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| ABWV | SHAFT DIAMETER | 0.251 INCHES MAXIMUM |
| AEGH | SWITCH OPERATING POSITION | START OF ROTATION |
| AAPN | SECTION QUANTITY | 1 |
| ADAP | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 3.000 AC |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 340.0 MAXIMUM |
| ADAQ | BODY LENGTH | 0.828 INCHES NOMINAL |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -3.0 TO 0.0 -55 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 -25 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 25 DEG CELSIUS SINGLE SECTION AND 0.0 TO 3.0 120 DEG CELSIUS SINGLE SECTION |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| SR-1 | MANUFACTURERS CODE | 82918 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
