| Part Number : 913342-46 | Manufacturer : Clarostat Sensors And Controls | ||
| NSN : 5905-01-294-6653 (5905012946653) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 12697 | ||
| NIIN : 01-294-6653 (012946653) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37403 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 91334246 | |||
Thank you for taking an interest in part number 913342-46, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905012946653, part number 913342-46 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 913342-46 | Manufacturer : Clarostat Sensors And Controls | ||
| NSN Number : 5905-01-294-6653 (5905012946653) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 12697 | ||
| NIIN : 012946653 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 913342-46, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905012946653, part number 913342-46 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-294-6653 Item PartTypeName: RESISTOR,FIXED,WIRE WOUND,INDUCT | 5905 | 012946653 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 913342-46 | 5 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPP | ELECTRICAL RESISTANCE | 400.000 OHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -10.000 TO 10.000 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 415.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.558 INCHES MINIMUM AND 0.568 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.120 INCHES MINIMUM AND 1.130 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 8.495 INCHES MINIMUM AND 8.505 INCHES MAXIMUM |
| AEFB | POWER DISSIPATION RATING IN WATTS | 180.000 FREE AIR |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | 40.0 DEG CELSIUS |
| AFWW | TERMINAL WIDTH | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | UNIT TEST DEV |
| AKNA | INCLOSURE TYPE | ENCAPSULATED |
| CBME | CUBIC MEASURE | 8.525 CUBIC INCHES |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CSCF | TERMINAL TYPE | TAB W/SCREW |
| FEAT | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE ELECTRONICS SUPPLY CENTER PRODUCTION STANDARD NO. L04056; FOR NAVY NUCLEAR PROPULSION PLANT PRODUCTS ONLY |
| PKWT | UNPACKAGED UNIT WEIGHT | 100.0 GRAMS |
| STYL | STYLE DESIGNATOR | RADIAL TERMINAL EACH END |
| TEST | TEST DATA DOCUMENT | 14933-L04056 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
