1 items in cart.

 13F026-00-0P

INSTANT RFQ
INSTANT RFQ
Enter List

D6002921-1 part number of Clarostat Sensors And Controls - Order Now!

Part Number : D6002921-1 Manufacturer : Clarostat Sensors And Controls
NSN : 5905-01-342-0717 (5905013420717)
Item Name : Resistor Variable Nonwire Wound CAGE Code : 12697
NIIN : 01-342-0717  (013420717)
FSC Code : 5905 Resistors
FSG Code : 59 Electrical and Electronic Equipment Components
INC Code : 37405
NCB Code : 01 Country : USA
Alternate P/N:  D60029211

Thank you for taking an interest in part number D6002921-1, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905013420717, part number D6002921-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Recently Viewed Parts
DSN9HB32E220Q55B
RFQ
62-096
RFQ

D6002921-1 part number of Clarostat Sensors And Controls - Order Now!

Part Number : D6002921-1 Manufacturer : Clarostat Sensors And Controls
NSN Number : 5905-01-342-0717 (5905013420717)
Item Name : Resistor Variable Nonwire Wound CAGE Code : 12697
NIIN : 013420717
FSC CODE : 5905 Resistors

Thank you for taking an interest in part number D6002921-1, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905013420717, part number D6002921-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number D6002921-1

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number D6002921-1 with NSN 5905-01-342-0717, 5905013420717

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-342-0717

Item Description:

Resistor Variable Nonwire Wound

59050134207170N
CIICHCCESDPMICCriticalityENAC
U G
Part NumberISCRNVCRNCCHCCMSDSSADC
D6002921-1593

Characteristics Data of NSN 5905-01-342-0717, 5905013420717

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLERECTANGULAR BUSHING MOUNTED
ABJTTERMINAL LENGTH0.250 INCHES MINIMUM
ABXFSHAFT LENGTH1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
ADAQBODY LENGTH0.781 INCHES NOMINAL
ADATBODY WIDTH0.475 INCHES MINIMUM AND 0.525 INCHES MAXIMUM
ADAUBODY HEIGHT0.500 INCHES NOMINAL
AEDXSHAFT STYLEROUND
AEEASWITCH TYPEPUSH-PULL
AEEDSWITCH VOLTAGE RATING IN VOLTS30.0
AEFDACTUATOR TYPESINGLE SHAFT
AEFKMAXIMUM STARTING TORQUE3.00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE3.00 INCH-OUNCES
AEFNNONTURN DEVICE LOCATIONAT 4 OCLOCK AND AT 8 OCLOCK
AEFPNONTURN DEVICE RADIUS0.500 INCHES NOMINAL
AEGJSWITCH CONTACT ARRANGEMENTSINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED
AFJNIII FRAGILITY FACTORMODERATELY RUGGED
AGAVIII END ITEM IDENTIFICATION5895-01-233-2919 COMMUNICATION SYSTEM CONTROL GROUP
AJYNSCREW THREAD DIAMETER0.250 INCHES NOMINAL
AJYQSCREW THREAD QUANTITY PER INCH32.0
APXHTERMINAL LOCATIONLOWER ADJACENT SIDE SINGLE ROW
CBBLFEATURES PROVIDEDHUMIDITY PROOF AND SWITCH
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
PMLCIII PRECIOUS MATERIAL AND LOCATIONTERMINAL SURFACES GOLD
TESTTEST DATA DOCUMENT57045-D6002921 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA
TTQYTERMINAL TYPE AND QUANTITY3 PIN
AARGRELIABILITY INDICATORNOT ESTABLISHED
AEFMMAXIMUM STOP TORQUE48.00 INCH-OUNCES
AEGHSWITCH OPERATING POSITIONANY POSITION OF ROTATION TRAVEL
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
ABWVSHAFT DIAMETER0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
ADAPMOUNTING BUSHING LENGTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
AJYPSCREW THREAD SERIES DESIGNATORUNEF
PRMTIII PRECIOUS MATERIALGOLD
AEDZSHAFT BEARING TYPESLEEVE
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION290.0 MINIMUM AND 300.0 MAXIMUM
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.200 INCHES NOMINAL
AXGYMOUNTING METHODSTANDARD BUSHING
CBMEIII CUBIC MEASURE0.195 CUBIC INCHES
CQCCELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG290.0 MINIMUM AND 300.0 MAXIMUM
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.100 INCHES NOMINAL
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-150.0 TO 150.0 SINGLE SECTION
CSDKSWITCH CURRENT TYPE AND RATING IN AMPS0.250 DC

Frequently Asked Questions (FAQ): D6002921-1 NSN Part

What Type of Item Is Part Number D6002921-1?
  • Part Number D6002921-1 is an "Resistor Variable Nonwire Wound" manufactured by Clarostat Sensors And Controls Managed with the NSN 5905-01-342-0717. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number D6002921-1?
  • Resistor Variable Nonwire Wound To receive a competitive quote for items with the part number D6002921-1, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 12697 Important When Purchasing Part Number D6002921-1?
  • CAGE Code 12697 signifies Clarostat Sensors And Controls Managed as the manufacturer of Part Number D6002921-1, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5905-01-342-0717 Paired with Part Number D6002921-1?
  • Part Number D6002921-1 is the identification assigned to the item by Clarostat Sensors And Controls Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5905-01-342-0717 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up