| Part Number : D408-N-PPS-2.5K | Manufacturer : Clarostat Sensors And Controls | ||
| NSN : 5905-01-526-3114 (5905015263114) | |||
| Item Name : Resistor Variable Nonwire Wound Nonprecision | CAGE Code : 12697 | ||
| NIIN : 01-526-3114 (015263114) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37405 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: D408NPPS2.5K | |||
Thank you for taking an interest in part number D408-N-PPS-2.5K, that of which is listed with the description Resistor Variable Nonwire Wound Nonprecision; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905015263114, part number D408-N-PPS-2.5K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : D408-N-PPS-2.5K | Manufacturer : Clarostat Sensors And Controls | ||
| NSN Number : 5905-01-526-3114 (5905015263114) | |||
| Item Name : Resistor Variable Nonwire Wound Nonprecision | CAGE Code : 12697 | ||
| NIIN : 015263114 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number D408-N-PPS-2.5K, that of which is listed with the description Resistor Variable Nonwire Wound Nonprecision; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905015263114, part number D408-N-PPS-2.5K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 HEAT SINK ALL SECTIONS |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| ABTD | MOUNTING SLOT WIDTH | 0.031 INCHES NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2500.0 OHMS ALL SECTIONS |
| AKPV | MOUNTING FACILITY QUANTITY | 1 |
| AEEA | SWITCH TYPE | PUSH-PULL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| ADAT | BODY WIDTH | 0.500 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | SWITCH |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL |
| AAPN | SECTION QUANTITY | 2 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.100 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | SLOT |
| AAQL | BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| ABJT | TERMINAL LENGTH | 0.875 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.062 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
