| Part Number : RA30NASD202E | Manufacturer : Clarostat Sensors And Controls | ||
| NSN : 5905-01-527-4673 (5905015274673) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 12697 | ||
| NIIN : 01-527-4673 (015274673) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number RA30NASD202E, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905015274673, part number RA30NASD202E is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : RA30NASD202E | Manufacturer : Clarostat Sensors And Controls | ||
| NSN Number : 5905-01-527-4673 (5905015274673) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 12697 | ||
| NIIN : 015274673 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number RA30NASD202E, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Clarostat Sensors And Controls and listed alongside the NSN 5905015274673, part number RA30NASD202E is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-527-4673 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 015274673 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| RA30NASD202E | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AXGY | Mounting Method | STANDARD BUSHING |
| CQCK | Rotary Actuator Travel In Angular Deg | 280.0 MINIMUM AND 305.0 MAXIMUM |
| AEFK | Maximum Starting Torque | 6.00 INCH-OUNCES |
| AJYP | Screw Thread Series Designator | UNEF |
| ABHP | Overall Length | 1.374 INCHES MINIMUM AND 1.686 INCHES MAXIMUM |
| ADAV | Overall Diameter | 2.135 INCHES MAXIMUM |
| AAPN | Section Quantity | 1 |
| APXH | Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AEFH | Effective Electrical Rotation In Deg Angular Rotation | 280.0 MINIMUM AND 305.0 MAXIMUM |
| AEFM | Maximum Stop Torque | 128.00 INCH-OUNCES |
| CQGN | Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power | 105.0 SINGLE SECTION |
| AEDX | Shaft Style | ROUND, SLOTTED |
| FEAT | Special Features | SIMILAR TO NSN 5905-00-577-2068 ONLY THIS ITEM HAS A NON-LINEAR COUNTER CLOCKWISE TAPER |
| ADAP | Mounting Bushing Length | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| ABWV | Shaft Diameter | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| TEST | Test Data Document | 81349-MIL-R-19 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| ABXF | Shaft Length | 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| AAQL | Body Style | CYLINDRICAL BUSHING MOUNTED |
| AARG | Reliability Indicator | NOT ESTABLISHED |
| CRGD | Power Dissipation Rating Per Section In Watts | 4.0 FREE AIR SINGLE SECTION |
| ZZZK | Specification/Standard Data | 81349-MIL-R-19/3 GOVERNMENT SPECIFICATION |
| AEFD | Actuator Type | SINGLE SHAFT |
| AJYN | Screw Thread Diameter | 0.375 INCHES NOMINAL |
| AEFN | Nonturn Device Location | AT 9 OCLOCK |
| AJYQ | Screw Thread Quantity Per Inch | 32 |
| AEFP | Nonturn Device Radius | 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM |
| CQCC | Electrical Resistance Per Section | 2.0 KILOHMS SINGLE SECTION |
| TTQY | Terminal Type And Quantity | 3 TAB, SOLDER LUG |
| MRC | Decoded Requirement | Clear Text Reply |
| ADAQ | Body Length | 0.530 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| CRSS | Resistance Tolerance Per Section In Percent | -10.0 TO 10.0 SINGLE SECTION |
| CSDH | Ambient Temp In Deg Celsius Per Section At Full Rated Power | 40.0 SINGLE SECTION |
| CRSX | Actuator Travel Control Feature | STOPS |
| ABPM | Body Diameter | 1.500 INCHES MINIMUM AND 1.710 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
