| Part Number : 8014CS2 | Manufacturer : Clausing Industrial Inc | ||
| NSN : 3416-01-438-9944 (3416014389944) | |||
| Item Name : Lathe Engine | CAGE Code : 64501 | ||
| NIIN : 01-438-9944 (014389944) | |||
| FSC Code : 3416 Lathes | |||
| FSG Code : 34 Metalworking Machinery | |||
| INC Code : 03137 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 8014CS2, that of which is listed with the description Lathe Engine; Manufactured by Clausing Industrial Inc and listed alongside the NSN 3416014389944, part number 8014CS2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 8014CS2 | Manufacturer : Clausing Industrial Inc | ||
| NSN Number : 3416-01-438-9944 (3416014389944) | |||
| Item Name : Lathe Engine | CAGE Code : 64501 | ||
| NIIN : 014389944 | |||
| FSC CODE : 3416 Lathes | |||
Thank you for taking an interest in part number 8014CS2, that of which is listed with the description Lathe Engine; Manufactured by Clausing Industrial Inc and listed alongside the NSN 3416014389944, part number 8014CS2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | Special Features | ESTABLISHED TO BE GROUPED WITH NSN 3416-00-057-6960 UNDER GENERIC MASTER FOR NSN ESTABLISHED FOR NSN 3416NCC614993 |
| AGLD | Performance Type | HEAVY DUTY |
| ELEC | Voltage In Volts | 230.0 AND 460.0 |
| MRC | Decoded Requirement | Clear Text Reply |
| AKSL | Purpose For Which Designed | TOOLROOM |
| ACDC | Current Type | AC |
| FREQ | Frequency In Hertz | 60 |
| AWLX | Electric Motor Quantity | 1 |
| BTTG | Swing Over Cross Slide | 7.750 INCHES NOMINAL |
| BTYQ | Carriage Quantity | 1 |
| FAAZ | Phase | THREE |
| AWHA | Bed Type | SOLID |
| AAXX | Mounting Type | FLOOR |
| ADQR | Center To Center Distance | 25.000 INCHES NOMINAL |
| APGF | Design Type | SCREW |
| BTSZ | Spindle Speed Quantity | 3 |
| BTTF | Actual Swing Over Bed | 13.750 INCHES NOMINAL |
| BTWB | Thread Change Quantity | 56 |
| BTYP | Hole Diameter Through Spindle | 1.656 INCHES NOMINAL |
| BTYR | Carriage Longitudinal Feed Operation Method | POWER |
| BTZR | Thread Quantity Range | +2.0/+56.0 PER INCH |
| BTTB | Spindle Speed Range In Rpm | 0.006153846 |
| BTTD | Rated Swing | 13.000 INCHES NOMINAL |
| BTWL | Headstock Drive Type | STEP CONE PULLEY |
| BTWM | Headstock Center Taper Size Designator | 3 MORSE |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| BTYW | Gear Change Type | QUICK |
| ASHK | Electric Motor Horsepower Rating | 10 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
