| Part Number : 8064P | Manufacturer : Clausing Industrial Inc | ||
| NSN : 3416-01-449-9193 (3416014499193) | |||
| Item Name : Lathe Engine | CAGE Code : 64501 | ||
| NIIN : 01-449-9193 (014499193) | |||
| FSC Code : 3416 Lathes | |||
| FSG Code : 34 Metalworking Machinery | |||
| INC Code : 03137 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 8064P, that of which is listed with the description Lathe Engine; Manufactured by Clausing Industrial Inc and listed alongside the NSN 3416014499193, part number 8064P is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 8064P | Manufacturer : Clausing Industrial Inc | ||
| NSN Number : 3416-01-449-9193 (3416014499193) | |||
| Item Name : Lathe Engine | CAGE Code : 64501 | ||
| NIIN : 014499193 | |||
| FSC CODE : 3416 Lathes | |||
Thank you for taking an interest in part number 8064P, that of which is listed with the description Lathe Engine; Manufactured by Clausing Industrial Inc and listed alongside the NSN 3416014499193, part number 8064P is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| AGLD | Performance Type | HEAVY DUTY |
| FAAZ | Phase | THREE |
| AKSL | Purpose For Which Designed | GENERAL OR TOOLROOM |
| ACDC | Current Type | AC |
| ELEC | Voltage In Volts | 208.0 AND 230.0 AND 460.0 |
| FREQ | Frequency In Hertz | 60 |
| AWLX | Electric Motor Quantity | 4 |
| BTWC | Rated Swing Through Open Gap | 28.700 INCHES NOMINAL |
| BTYP | Hole Diameter Through Spindle | 3.000 INCHES NOMINAL |
| BTZR | Thread Quantity Range | +2.0/+84.0 PER INCH |
| FEAT | Special Features | GENERICALLY GROUPED WITH 3416-01-237-6063 AND 3416NCC617558 |
| AWHA | Bed Type | REMOVABLE BLOCK GAP |
| AAXX | Mounting Type | FLOOR |
| ADQR | Center To Center Distance | 60.000 INCHES NOMINAL |
| MRC | Decoded Requirement | Clear Text Reply |
| APGF | Design Type | SCREW |
| BTSZ | Spindle Speed Quantity | 16 |
| BTWB | Thread Change Quantity | 73 |
| BTWD | Actual Swing Through Open Gap | 28.700 INCHES NOMINAL |
| BTWM | Headstock Center Taper Size Designator | 5 MORSE |
| BTYQ | Carriage Quantity | 1 |
| BTYW | Gear Change Type | QUICK |
| BTTB | Spindle Speed Range In Rpm | 0.0125 |
| BTTG | Swing Over Cross Slide | 10.600 INCHES NOMINAL |
| BTWF | Rated Swing Over Closed Gap | 18.100 INCHES NOMINAL |
| BTWL | Headstock Drive Type | DIRECT PULLEY, BACK GEARED |
| BTYR | Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| ASHK | Electric Motor Horsepower Rating | 10 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
