| Part Number : 8054CS2 | Manufacturer : Clausing Industrial Inc | ||
| NSN : 3416-01-524-7797 (3416015247797) | |||
| Item Name : Lathe Engine | CAGE Code : 64501 | ||
| NIIN : 01-524-7797 (015247797) | |||
| FSC Code : 3416 Lathes | |||
| FSG Code : 34 Metalworking Machinery | |||
| INC Code : 03137 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 8054CS2, that of which is listed with the description Lathe Engine; Manufactured by Clausing Industrial Inc and listed alongside the NSN 3416015247797, part number 8054CS2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 8054CS2 | Manufacturer : Clausing Industrial Inc | ||
| NSN Number : 3416-01-524-7797 (3416015247797) | |||
| Item Name : Lathe Engine | CAGE Code : 64501 | ||
| NIIN : 015247797 | |||
| FSC CODE : 3416 Lathes | |||
Thank you for taking an interest in part number 8054CS2, that of which is listed with the description Lathe Engine; Manufactured by Clausing Industrial Inc and listed alongside the NSN 3416015247797, part number 8054CS2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| BTSZ | SPINDLE SPEED QUANTITY | 3 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 0.0 TO 2000.0 |
| BTTG | SWING OVER CROSS SLIDE | 10.620 INCHES NOMINAL |
| BTWD | ACTUAL SWING THROUGH OPEN GAP | 28.740 INCHES NOMINAL |
| BTWF | RATED SWING OVER CLOSED GAP | 18.100 INCHES NOMINAL |
| BTWG | ACTUAL SWING OVER CLOSED GAP | 18.000 INCHES NOMINAL |
| BTWL | HEADSTOCK DRIVE TYPE | DIRECT PULLEY, BACK GEARED |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 6 MORSE |
| AWHA | BED TYPE | REMOVABLE BLOCK GAP |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 15.000 |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1-17 IN FACE PLATE (17-803); 1-CHIP GUARD (18-807); 1-12 IN 3-JAW UNIVERSAL CHUCK (1225324); 1-14 IN 4-JAW INDEPENDENT CHUCK (1414524); 1-EE COLLET SET (3160-52100) |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND OR POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND OR POWER |
| BTYW | GEAR CHANGE TYPE | QUICK |
| BTZR | THREAD QUANTITY RANGE | 2.0 TO 84.0 PER INCH |
| ELEC | VOLTAGE IN VOLTS | 230.0 |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL OR TOOLROOM |
| AGLD | PERFORMANCE TYPE | HEAVY DUTY |
| FEAT | SPECIAL FEATURES | HAS CONSTANT SURFACE SPED W/DRO; COMES WITH A 1/2"" - 2 1/2"" NOSE MOUNTED MULTI-SIZE COLLET CHUCK; ALSO HAS CAPABILITY TO DO METRIC THREAD CHANGE QUANITY 51 WITH THE THREAD QUANITY RANGE OF .2 TO 14 MM |
| ADQR | CENTER TO CENTER DISTANCE | 60.000 INCHES NOMINAL |
| FAAZ | PHASE | THREE |
| AAXX | MOUNTING TYPE | FLOOR |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| APGF | DESIGN TYPE | SCREW |
| ACDC | CURRENT TYPE | AC |
| BTWB | THREAD CHANGE QUANTITY | 73 |
| BTWC | RATED SWING THROUGH OPEN GAP | 28.740 INCHES NOMINAL |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 3.000 INCHES NOMINAL |
| AWLX | ELECTRIC MOTOR QUANTITY | 2 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
