| Part Number : 8016CS | Manufacturer : Clausing Industrial Inc | ||
| NSN : 3416-01-547-9285 (3416015479285) | |||
| Item Name : Lathe Engine | CAGE Code : 64501 | ||
| NIIN : 01-547-9285 (015479285) | |||
| FSC Code : 3416 Lathes | |||
| FSG Code : 34 Metalworking Machinery | |||
| INC Code : 03137 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 8016CS, that of which is listed with the description Lathe Engine; Manufactured by Clausing Industrial Inc and listed alongside the NSN 3416015479285, part number 8016CS is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 8016CS | Manufacturer : Clausing Industrial Inc | ||
| NSN Number : 3416-01-547-9285 (3416015479285) | |||
| Item Name : Lathe Engine | CAGE Code : 64501 | ||
| NIIN : 015479285 | |||
| FSC CODE : 3416 Lathes | |||
Thank you for taking an interest in part number 8016CS, that of which is listed with the description Lathe Engine; Manufactured by Clausing Industrial Inc and listed alongside the NSN 3416015479285, part number 8016CS is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| BTSZ | SPINDLE SPEED QUANTITY | 3 |
| BTTD | RATED SWING | 13.000 INCHES NOMINAL |
| BTTF | ACTUAL SWING OVER BED | 13.750 INCHES NOMINAL |
| BTTG | SWING OVER CROSS SLIDE | 7.750 INCHES NOMINAL |
| BTWB | THREAD CHANGE QUANTITY | 56 |
| BTWL | HEADSTOCK DRIVE TYPE | STEP CONE PULLEY |
| AWHA | BED TYPE | PERMANENT GAP |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 1.650 INCHES NOMINAL |
| AKSL | PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 10.000 |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | POWER |
| BTYW | GEAR CHANGE TYPE | PLAIN |
| ELEC | VOLTAGE IN VOLTS | 230.0 AND 460.0 |
| AGLD | PERFORMANCE TYPE | HEAVY DUTY |
| ADQR | CENTER TO CENTER DISTANCE | 25.000 INCHES NOMINAL |
| FAAZ | PHASE | THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ACDC | CURRENT TYPE | AC |
| APGF | DESIGN TYPE | SCREW |
| BTTB | SPINDLE SPEED RANGE IN RPM | 0.0 TO 3250.0 |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 3 MORSE |
| AAXX | MOUNTING TYPE | FLOOR |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTZR | THREAD QUANTITY RANGE | 2.0 TO 56.0 PER INCH |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
