| Part Number : 2102 | Manufacturer : Cmv Sharper Finish | ||
| NSN : 3130-01-318-3358 (3130013183358) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 58446 | ||
| NIIN : 01-318-3358 (013183358) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 2102, that of which is listed with the description Bearing Unit Ball; Manufactured by Cmv Sharper Finish and listed alongside the NSN 3130013183358, part number 2102 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 2102 | Manufacturer : Cmv Sharper Finish | ||
| NSN Number : 3130-01-318-3358 (3130013183358) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 58446 | ||
| NIIN : 013183358 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number 2102, that of which is listed with the description Bearing Unit Ball; Manufactured by Cmv Sharper Finish and listed alongside the NSN 3130013183358, part number 2102 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-318-3358 Item PartTypeName: BEARING UNIT,BALL | 3130 | 013183358 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2102 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AMCL | BLOCK TYPE | FIXED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| STYL | STYLE DESIGNATOR | FLANGE BLOCK |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHZC | ASSEMBLY OVERALL LENGTH | 3.188 INCHES NOMINAL |
| AKRF | SEAL TYPE | LABYRINTH |
| ANKF | SEAL LOCATION | BOTH ENDS |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| ABKU | FLANGE THICKNESS | 1.000 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 2.375 INCHES NOMINAL |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| MATT | MATERIAL | IRON CAST HOUSING |
| ABJH | TEMP RATING | 250.0 DEG FAHRENHEIT |
| ABTB | MOUNTING HOLE DIAMETER | 0.781 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 2.9375 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 7.750 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| ANJS | SHAFT END TYPE | OPEN |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 90.0 DEGREES NOMINAL |
| CWJW | MOUNTING HOLE TYPE | ROUND,UNTHREADED |
| CXCX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG SIDE OF A SQUARE | 6.000 INCHES NOMINAL |
| MATT | MATERIAL | STEEL BEARING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
