| Part Number : 9217-16 | Manufacturer : Columbus Jack Corporation | ||
| NSN : 5315-01-473-3377 (5315014733377) | |||
| Item Name : Pin Shoulder Headless | CAGE Code : 00994 | ||
| NIIN : 01-473-3377 (014733377) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16749 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 921716 | |||
Thank you for taking an interest in part number 9217-16, that of which is listed with the description Pin Shoulder Headless; Manufactured by Columbus Jack Corporation and listed alongside the NSN 5315014733377, part number 9217-16 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 9217-16 | Manufacturer : Columbus Jack Corporation | ||
| NSN Number : 5315-01-473-3377 (5315014733377) | |||
| Item Name : Pin Shoulder Headless | CAGE Code : 00994 | ||
| NIIN : 014733377 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 9217-16, that of which is listed with the description Pin Shoulder Headless; Manufactured by Columbus Jack Corporation and listed alongside the NSN 5315014733377, part number 9217-16 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-473-3377 Item PartTypeName: PIN,SHOULDER,HEADLESS | 5315 | 014733377 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9217-16 | 6 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MRC | Decoded Requirement | Clear Text Reply |
| ABPA | Undercut Diameter | 0.140 INCHES MINIMUM AND 0.142 INCHES MAXIMUM |
| MATT | Material | STEEL COMP 630 OVERALL |
| SUPP | Supplementary Features | PIN IS VERY UNIQUE;PIN HAS A CIRCULAR GROOVE AND BOTH ENDS ARE CHAMFERED;OFF SECOND END IS A STEM THAT IS SQUARE 0.656 INCHES LONG WITH A NOMINAL DIAMETER OF 0.105 INCHES |
| AAHP | Second End Style | SQUARE |
| ABHP | Overall Length | 1.562 INCHES NOMINAL |
| CXCY | Part Name Assigned By Controlling Agency | PLUNGER, SHORT |
| ABPC | Undercut Width | 0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| STYL | Style Designator | UNDERCUT |
| AAGZ | First End Style | CHAMFERED |
| AAVH | Shoulder Diameter | 0.105 INCHES NOMINAL |
| FEAT | Special Features | SECOND END LENGTH IS 0.656 INCHES LONG |
| AGAV | End Item Identification | USED ON PUMP ASSEMBLY |
| CRMG | First End Taper Angle | 45.0 DEGREES NOMINAL |
| AATR | Shank Length | 0.471 INCHES NOMINAL |
| MDCL | Material Document And Classification | ASTMA564,TY630 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CRDY | First End Location | CHAMFERED END |
| AAZE | Shank Diameter | 0.246 INCHES MINIMUM AND 0.248 INCHES MAXIMUM |
| CQBB | Second End Relationship With First End | NOT IDENTICAL |
| AMCS | First End Taper Length | 0.030 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
