| Part Number : C0METL0 | Manufacturer : Comet Industries Inc | ||
| NSN : 3220-00-278-9814 (3220002789814) | |||
| Item Name : Saw Radial Overarm | CAGE Code : 14085 | ||
| NIIN : 00-278-9814 (002789814) | |||
| FSC Code : 3220 Woodworking Machines | |||
| FSG Code : 32 Woodworking Machinery and Equipment | |||
| INC Code : 07446 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number C0METL0, that of which is listed with the description Saw Radial Overarm; Manufactured by Comet Industries Inc and listed alongside the NSN 3220002789814, part number C0METL0 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : C0METL0 | Manufacturer : Comet Industries Inc | ||
| NSN Number : 3220-00-278-9814 (3220002789814) | |||
| Item Name : Saw Radial Overarm | CAGE Code : 14085 | ||
| NIIN : 002789814 | |||
| FSC CODE : 3220 Woodworking Machines | |||
Thank you for taking an interest in part number C0METL0, that of which is listed with the description Saw Radial Overarm; Manufactured by Comet Industries Inc and listed alongside the NSN 3220002789814, part number C0METL0 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3220-00-278-9814 Item PartTypeName: SAW,RADIAL OVERARM,WOODWORKING | 3220 | 002789814 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| C0METL0 | 1 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ACDC | CURRENT TYPE | AC |
| ACZB | FREQUENCY RATING | 60.0 HERTZ NOMINAL |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | COMBINATION RIP AND CROSSCUT BLADE CROSSCUT BLADE 1 |
| AMQY | INSTALLATION DESIGN | NONPORTABLE |
| AMSE | VOLTAGE RATING | 220.0 VOLTS NOMINAL |
| AMSE | VOLTAGE RATING | 440.0 POUNDS PER HOUR WET |
| ANCY | HORSEPOWER RATING | 5.000 |
| ANJN | MOTOR TYPE | NONTILTING |
| ARCM | DRIVE METHOD | ELECTRIC MOTOR |
| BPTM | BLADE MAXIMUM DIAMETER ACCOMMODATED | 12.000 INCHES |
| BYPG | YOKE TYPE | SWIVEL |
| BZZH | CUTOFF CAPACITY | STOCK 1/4 IN. THK AND 48 IN. W TO 2 IN. THK AND 48 IN. W |
| BZZJ | MAXIMUM RIPPING CAPACITY | 48.000 INCHES |
| BZZZ | BLADE ARBOR DIAMETER ACCOMMODATED | 0.750 INCHES NOMINAL |
| CBBB | POWER RIP FEED | NOT INCLUDED |
| CBBC | POWER CROSSFEED | NOT INCLUDED |
| CBBD | SAW BLADE MOTOR ELECTRIC BRAKE FEATURE | NOT INCLUDED |
| CBBF | ARM ROTATION IN DEG | 180.0 |
| CBBG | SWIVEL ANGLE IN DEG | 180.0 |
| CBBJ | CUTTING TOOL TAPPED ARBOR FEATURE | INCLUDED |
| FAAZ | PHASE | THREE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
