| Part Number : BACW10BP4NDP | Manufacturer : Component Products Corporation | ||
| NSN : 5310-01-522-7975 (5310015227975) | |||
| Item Name : Washer Flat | CAGE Code : 6F140 | ||
| NIIN : 01-522-7975 (015227975) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 13393 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number BACW10BP4NDP, that of which is listed with the description Washer Flat; Manufactured by Component Products Corporation and listed alongside the NSN 5310015227975, part number BACW10BP4NDP is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : BACW10BP4NDP | Manufacturer : Component Products Corporation | ||
| NSN Number : 5310-01-522-7975 (5310015227975) | |||
| Item Name : Washer Flat | CAGE Code : 6F140 | ||
| NIIN : 015227975 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number BACW10BP4NDP, that of which is listed with the description Washer Flat; Manufactured by Component Products Corporation and listed alongside the NSN 5310015227975, part number BACW10BP4NDP is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-01-522-7975 Item PartTypeName: WASHER,FLAT | 5310 | 015227975 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NTA11551-4NDP | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CQBC | III MINIMUM TENSILE STRENGTH | 140000 POUNDS PER SQUARE INCH |
| ADAV | OVERALL DIAMETER | 0.475 INCHES MINIMUM AND 0.495 INCHES MAXIMUM |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| FEAT | SPECIAL FEATURES | HEAT TREAT TO MINIMUM TENSILE STRENGTH PER AMS-H-6875; SERVICE TEMPERATURE 450.0 DEGREES F; USED ON TRANSMISSION INSTALLATION-INBOARD T.E. FLAP DRIVE OUTBOARD (INBOARD T.E. FLAP TRANSMISSIONS ONLY) |
| AGAV | III END ITEM IDENTIFICATION | B757 AIRCRAFT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5525 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ABNM | THICKNESS | 0.012 INCHES MINIMUM AND 0.020 INCHES MAXIMUM |
| ABMW | PERIPHERAL SHAPE STYLE | ROUND |
| ABMX | CENTER HOLE SHAPE STYLE | ROUND |
| AAUB | HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.261 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER, PLAIN |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
