| Part Number : A250-60-P1 | Manufacturer : Continental Gear Co | ||
| NSN : 3020-00-684-2231 (3020006842231) | |||
| Item Name : Gear Spur | CAGE Code : 22488 | ||
| NIIN : 00-684-2231 (006842231) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05466 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: A25060P1 | |||
Thank you for taking an interest in part number A250-60-P1, that of which is listed with the description Gear Spur; Manufactured by Continental Gear Co and listed alongside the NSN 3020006842231, part number A250-60-P1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
4 m company inc
CAGE Code: 1K407,57268 |
3d safety services pty ltd
CAGE Code: Z2JB4 |
|
259 holdings ltd
CAGE Code: 431P3 |
4 ld inc
CAGE Code: 0ACW5 |
|
3h industries inc
CAGE Code: 60754 |
2h energy
CAGE Code: F1797 |
|
3gen corporation
CAGE Code: 3SPS3 |
498 msug
CAGE Code: 5VW08 |
|
1db metravib
CAGE Code: FAQ34 |
12 volt shop
CAGE Code: Z0JM2 |
|
3d evolution ltd
CAGE Code: KD959 |
3gen grup trafik ltd
CAGE Code: TB427 |
|
17th st photo supply inc
CAGE Code: 1VV61 |
4 sure com inc
CAGE Code: 1LDH8 |
|
31 mile equipment co
CAGE Code: 07PE3 |
| Part Number : A250-60-P1 | Manufacturer : Continental Gear Co | ||
| NSN Number : 3020-00-684-2231 (3020006842231) | |||
| Item Name : Gear Spur | CAGE Code : 22488 | ||
| NIIN : 006842231 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number A250-60-P1, that of which is listed with the description Gear Spur; Manufactured by Continental Gear Co and listed alongside the NSN 3020006842231, part number A250-60-P1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-684-2231 Item PartTypeName: GEAR,SPUR | 3020 | 006842231 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| G3-60-Q10 | 2 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| AGJS | PITCH DIAMETER | 1.2490 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 60 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.292 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.250 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.125 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PINNED FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| MATT | MATERIAL | STEEL COMP 303SE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720,COMP 303SE MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| FEAT | SPECIAL FEATURES | UNTHREADED HOLE 90 DEG FROM THREADED HOLE,1 EA SET SCREW |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
