| Part Number : FSC27DPC1 | Manufacturer : Cooper Cameron Corp | ||
| NSN : 3020-00-249-1157 (3020002491157) | |||
| Item Name : Gear Helical | CAGE Code : 88080 | ||
| NIIN : 00-249-1157 (002491157) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number FSC27DPC1, that of which is listed with the description Gear Helical; Manufactured by Cooper Cameron Corp and listed alongside the NSN 3020002491157, part number FSC27DPC1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m medical imaging
CAGE Code: 0ZRE5 |
3 wire group inc
CAGE Code: 4X0B1,7VME3 |
|
4 cs electronic packaging inc
CAGE Code: 60744 |
12 volt shop
CAGE Code: Z0JM2 |
|
3m company health care mfg
CAGE Code: 04515 |
2 s 2 inc
CAGE Code: 5A8X0,787R6 |
|
2h energy
CAGE Code: F1797 |
3m telecom system group
CAGE Code: 0Y7Y1 |
|
3h products co
CAGE Code: 0CJ60 |
21st century optics inc
CAGE Code: 0TN38 |
|
3ps inc
CAGE Code: 1MHK2 |
3m canada inc
CAGE Code: 09581,0GSY9,L2266 |
|
28eme groupe geographique
CAGE Code: FAR17 |
3 dimensional engineering inc
CAGE Code: 1HLX4 |
|
14 dock drive inc
CAGE Code: 14677 |
| Part Number : FSC27DPC1 | Manufacturer : Cooper Cameron Corp | ||
| NSN Number : 3020-00-249-1157 (3020002491157) | |||
| Item Name : Gear Helical | CAGE Code : 88080 | ||
| NIIN : 002491157 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number FSC27DPC1, that of which is listed with the description Gear Helical; Manufactured by Cooper Cameron Corp and listed alongside the NSN 3020002491157, part number FSC27DPC1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-249-1157 Item PartTypeName: GEAR,HELICAL | 3020 | 002491157 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| FS27AA | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,WITH LIGHTENING HOLES |
| AGJS | PITCH DIAMETER | 9.1680 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 69 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 24.0 ROCKWELL C NOMINAL OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 9.416 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 19.8164 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.375 INCHES SECOND END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.500 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 1.750 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.625 INCHES FIRST END |
| CWSN | KEYWAY NOMINAL WIDTH | 0.375 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 1.000 INCHES FIRST END |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 2.250 INCHES SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 2.625 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | 3/4 IN. RADIUS BOSS ON BOTH HUBS LOCATED AT BOTTOM OF KEYWAY |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,ALLOY NO. 3 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
