| Part Number : AN-10.0-185CS-M2 | Manufacturer : Core Industries Inc | ||
| NSN : 4730-01-412-5277 (4730014125277) | |||
| Item Name : Strainer Sediment | CAGE Code : 76588 | ||
| NIIN : 01-412-5277 (014125277) | |||
| FSC Code : 4730 Hose Pipe Tube Lubrication and Railing Fittings | |||
| FSG Code : 47 Pipe Tubing Hose and Fittings | |||
| INC Code : 04200 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: AN10.0185CSM2 | |||
Thank you for taking an interest in part number AN-10.0-185CS-M2, that of which is listed with the description Strainer Sediment; Manufactured by Core Industries Inc and listed alongside the NSN 4730014125277, part number AN-10.0-185CS-M2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AN-10.0-185CS-M2 | Manufacturer : Core Industries Inc | ||
| NSN Number : 4730-01-412-5277 (4730014125277) | |||
| Item Name : Strainer Sediment | CAGE Code : 76588 | ||
| NIIN : 014125277 | |||
| FSC CODE : 4730 Hose Pipe Tube Lubrication and Railing Fittings | |||
Thank you for taking an interest in part number AN-10.0-185CS-M2, that of which is listed with the description Strainer Sediment; Manufactured by Core Industries Inc and listed alongside the NSN 4730014125277, part number AN-10.0-185CS-M2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4730-01-412-5277 Item PartTypeName: STRAINER,SEDIMENT | 4730 | 014125277 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AN-10.0-185CS-M2 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAU | BODY HEIGHT | 26.375 INCHES NOMINAL |
| MATT | MATERIAL | STEEL BODY STEEL COMP 304 FILTERING MEDIUM |
| AZKQ | TEMP RATING | 100.0 DEG FAHRENHEIT MAXIMUM |
| AGCW | WIRE DIAMETER | 0.010 INCHES NOMINAL |
| MEDA | MEDIA FOR WHICH DESIGNED | WATER |
| AKSX | MESH SIZE | 40.0 |
| CRXW | FILTERING MEDIA DESIGN | MESH 1ST FILTERING MEDIA RESPONSE PERFORATED 2ND FILTERING MEDIA RESPONSE |
| FEAT | SPECIAL FEATURES | FOR MAXIMUM EFFICIENCY, DETERMINE LENGTH OF TIME IT TAKES FOR BASKETS TO BECOME APPROXIMATELY 1/3 CLOGGED. IF STRAINER IS EQUIPPED WITH A BLOW DOWN VALVE AND OPEN BOTTOM BASKET, OPEN VALVE UNTIL SEDIMENT IS REMOVED. WHERE STAINER IS NOT FITTED FOR BLOW DOWN REMOVE TOP COVER AND CLEAN BASKET. REPLACE BASKET IN STRAINER IN ORIGINAL POSITION AND TIGHTEN COVER. REPLACE GASKET IF NECESSARY. SPARE BASKET WILL FACILITATE SHORTER SHUT DOWN TIME. PRESSURE GAUGE INSTALLED BEFORE AND AFTER STRAINER IN LINE WILL INDICATE PRESSURE LOSS DUE TO CLOGGING AND MAY BE USED AS A GUIDE TO DETERMINE CLEANING IS REQUIRED |
| CQGM | MAXIMUM OPERATING PRESSURE | 285.0 POUNDS PER SQUARE INCH |
| AKSV | PERFORATION DIAMETER | 0.156 INCHES NOMINAL |
| CRXZ | FIRST INTAKE CONNECTION TYPE | RAISED FACE FLANGE CENTER RAISED FACE FLANGE LINE |
| AKSW | PERFORATION QUANTITY | 33.0 PER SQUARE INCH |
| STYL | STYLE DESIGNATOR | DIVERTED FLOW BASKET STRAINER W/BOLTED COVER |
| CSJR | FIRST DISCHARGE CONNECTION RELATIONSHIP TO INTAKE CONNECTION | IDENTICAL TO FIRST INTAKE CONNECTION |
| CSKY | DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET | 16.000 INCHES NOMINAL |
| CSRH | FIRST INTAKE FLANGE OUTSIDE DIAMETER | 16.000 INCHES NOMINAL |
| CSTD | FIRST INTAKE FLANGE SHAPE STYLE | ROUND W/UNTHREADED BOLT HOLES |
| CTBJ | FIRST INTAKE FLANGE FACE STYLE | RAISED |
| CWFT | FIRST INTAKE FLANGE RAISED FACE HEIGHT | 0.062 INCHES NOMINAL |
| CWMF | FIRST INTAKE FLANGE RAISED FACE DIAMETER | 12.750 INCHES NOMINAL |
| CTHJ | FIRST INTAKE FLANGE THICKNESS | 1.188 INCHES NOMINAL |
| AAXX | MOUNTING TYPE | INLET CONNECTION AND OUTLET CONNECTION LINE |
| ADAQ | BODY LENGTH | 21.625 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
