Part Number : PRMA1A05 | Manufacturer : Cp Clare Corp | ||
NSN : 5945-01-233-9299 (5945012339299) | |||
Item Name : Relay Reed | CAGE Code : 71482 | ||
NIIN : 01-233-9299 (012339299) | |||
FSC Code : 5945 Relays and Solenoids | |||
FSG Code : 59 Electrical and Electronic Equipment Components | |||
INC Code : 30544 | |||
NCB Code : 01 | Country : USA |
Thank you for taking an interest in part number PRMA1A05, that of which is listed with the description Relay Reed; Manufactured by Cp Clare Corp and listed alongside the NSN 5945012339299, part number PRMA1A05 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : PRMA1A05 | Manufacturer : Cp Clare Corp | ||
NSN Number : 5945-01-233-9299 (5945012339299) | |||
Item Name : Relay Reed | CAGE Code : 71482 | ||
NIIN : 012339299 | |||
FSC CODE : 5945 Relays and Solenoids |
Thank you for taking an interest in part number PRMA1A05, that of which is listed with the description Relay Reed; Manufactured by Cp Clare Corp and listed alongside the NSN 5945012339299, part number PRMA1A05 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5945-01-233-9299 Item PartTypeName: RELAY,REED | 5945 | 012339299 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
77C721255P001 | 5 | 2 | 1 |
MRC | Criteria | Characteristic |
---|---|---|
ABHP | OVERALL LENGTH | 0.770 INCHES MAXIMUM |
ABKW | OVERALL HEIGHT | 0.423 INCHES MAXIMUM |
ABMK | OVERALL WIDTH | 0.270 INCHES MAXIMUM |
ADTV | CASE MATERIAL | PLASTIC |
ADZC | ENVIRONMENTAL PROTECTION | DUSTPROOF |
AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
AGAV | END ITEM IDENTIFICATION | OTHBANFPS118 |
AKDX | WINDING QUANTITY | 1 |
AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
APCN | COIL QUANTITY | 1 |
APNA | WINDING DC RESISTANCE RATING | 500.0 OHMS NOMINAL SINGLE WINDING |
APNP | DUTY TYPE | CONTINUOUS |
AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 1 PRINTED CIRCUIT TERMINAL SINGLE MOUNTING FACILITY |
BBRG | STORAGE TYPE | GENERAL PURPOSE WAREHOUSE |
CBME | CUBIC MEASURE | 0.088 CUBIC INCHES |
CRNG | NONPILE-UP MAIN CONTACT ARRANGEMENT | 1 POLE,SINGLE THROW,NORMALLY OPEN,MOMENTARY ACTION |
CSXF | OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP | 5.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING |
CTDL | MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 500.0 MILLIAMPERES DC RESISTIVE LOAD |
CWAB | MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS | 100.0 DC |
TEST | TEST DATA DOCUMENT | 03538-77C721255 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR |
TTQY | TERMINAL TYPE AND QUANTITY | 1 PRINTED CIRCUIT ALL FUNCTIONS |
ZZZK | SPECIFICATION/STANDARD DATA | 03538-77C721255 MANUFACTURERS SOURCE CONTROL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote