| Part Number : RD17675-1 | Manufacturer : Crane Corp | ||
| NSN : 3040-01-026-3014 (3040010263014) | |||
| Item Name : Shaft Shouldered | CAGE Code : 51663 | ||
| NIIN : 01-026-3014 (010263014) | |||
| FSC Code : 3040 Miscellaneous Power Transmission Equipment | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 22914 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: RD176751 | |||
Thank you for taking an interest in part number RD17675-1, that of which is listed with the description Shaft Shouldered; Manufactured by Crane Corp and listed alongside the NSN 3040010263014, part number RD17675-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : RD17675-1 | Manufacturer : Crane Corp | ||
| NSN Number : 3040-01-026-3014 (3040010263014) | |||
| Item Name : Shaft Shouldered | CAGE Code : 51663 | ||
| NIIN : 010263014 | |||
| FSC CODE : 3040 Miscellaneous Power Transmission Equipment | |||
Thank you for taking an interest in part number RD17675-1, that of which is listed with the description Shaft Shouldered; Manufactured by Crane Corp and listed alongside the NSN 3040010263014, part number RD17675-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-01-026-3014 Item PartTypeName: SHAFT,SHOULDERED | 3040 | 010263014 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| RD17675-1 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| AAHG | FIRST END GROOVE WIDTH | 0.0500 INCHES MINIMUM AND 0.0540 INCHES MAXIMUM |
| AAHH | FIRST END GROOVE DIAMETER | 0.3500 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | SPLINED (STRAIGHT) |
| ABHP | OVERALL LENGTH | 1.342 INCHES MINIMUM AND 1.345 INCHES MAXIMUM |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.604 INCHES MINIMUM AND 0.612 INCHES MAXIMUM |
| AMDL | FIRST END DIAMETER | 0.3747 INCHES MINIMUM AND 0.3749 INCHES MAXIMUM |
| AMFZ | SECOND END DIAMETER | 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 0.141 INCHES MINIMUM AND 0.171 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.2409 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 3 |
| BDSR | SECOND END SPLINE QUANTITY | 8 |
| CSPY | LARGEST STEP DIAMETER | 0.3747 INCHES MINIMUM AND 0.3749 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES |
| FEAT | SPECIAL FEATURES | DISTANCE BETWEEN HOLE CENTERS 0.280 IN. MIN,0.285 IN. MAX |
| MATT | MATERIAL | STEEL COMP 4140 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
