| Part Number : 51191U | Manufacturer : Crc Evans Automatic Welding | ||
| NSN : 6110-00-004-1045 (6110000041045) | |||
| Item Name : Starter Motor | CAGE Code : 00409 | ||
| NIIN : 00-004-1045 (000041045) | |||
| FSC Code : 6110 Electrical Control Equipment | |||
| FSG Code : 61 Electric Wire and Power and Distribution Equipment | |||
| INC Code : 00905 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 51191U, that of which is listed with the description Starter Motor; Manufactured by Crc Evans Automatic Welding and listed alongside the NSN 6110000041045, part number 51191U is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 51191U | Manufacturer : Crc Evans Automatic Welding | ||
| NSN Number : 6110-00-004-1045 (6110000041045) | |||
| Item Name : Starter Motor | CAGE Code : 00409 | ||
| NIIN : 000041045 | |||
| FSC CODE : 6110 Electrical Control Equipment | |||
Thank you for taking an interest in part number 51191U, that of which is listed with the description Starter Motor; Manufactured by Crc Evans Automatic Welding and listed alongside the NSN 6110000041045, part number 51191U is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 6110-00-004-1045 Item PartTypeName: STARTER,MOTOR | 6110 | 000041045 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 122084 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 5.440 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 3.500 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.400 INCHES MAXIMUM |
| ABUS | POWER RATING | 10.000 HORSEPOWER AND 7.500 HORSEPOWER |
| ACYN | AC VOLTAGE RATING | 220.0 VOLTS MINIMUM AND 440.0 VOLTS MAXIMUM |
| ACZB | FREQUENCY RATING | 50.0 HERTZ MINIMUM AND 60.0 HERTZ MAXIMUM |
| AFLW | ACTUATION METHOD | MAGNETIC |
| AGLD | PERFORMANCE TYPE | AUTOMATIC |
| AJXE | SIZE DESIGNATOR | 00 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ALGC | MOUNTING CONFIGURATION | THREE MTG SLOTS,ONE HOLE CENTERED AT TOP,TWO BOTTOM SLOTS 2 IN. FROM C TO C WITH TOP SLOT 3-1/4 IN. FROM CENTER LINE OF BOTTOM HOLES |
| ANCN | OPERATING VOLTAGE CHARACTERISTIC | FULL |
| ANCY | UNABLE TO DECODE | UNABLE TO DECODE AND UNABLE TO DECODE |
| ANDE | ACTUATOR VOLTAGE | 110.0 AC |
| ANDW | LOAD PROTECTION TYPE | OVERLOAD |
| ANQC | NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION STANDARDS DESIGN | DESIGNED PER NEMA STD |
| ANRH | AMP SIZE RATING | 30.0 |
| ANRK | SWITCH FUNCTIONAL POSITIONS | AUTOMATIC AND RESET |
| AQZF | CONTROL TYPE | LOCAL |
| FAAZ | PHASE | THREE |
| FREQ | FREQUENCY IN HERTZ | 50.0 AND 60.0 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
