| Part Number : MS35250-11 | Manufacturer : Crescent Manufacturing Company | ||
| NSN : 5305-00-078-0140 (5305000780140) | |||
| Item Name : Screw Machine | CAGE Code : 63020 | ||
| NIIN : 00-078-0140 (000780140) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: MS3525011 | |||
Thank you for taking an interest in part number MS35250-11, that of which is listed with the description Screw Machine; Manufactured by Crescent Manufacturing Company and listed alongside the NSN 5305000780140, part number MS35250-11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
4 ld inc
CAGE Code: 0ACW5 |
3m purification pty limited
CAGE Code: Z5295 |
|
3m co admininistrative electronic
CAGE Code: 20999 |
3 v fastener co inc
CAGE Code: 1ER65 |
|
4 cs electronic packaging inc
CAGE Code: 60744 |
3gen corporation
CAGE Code: 3SPS3 |
|
2eme regiment du materiel
CAGE Code: FARD5 |
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
|
485 engineering installation group
CAGE Code: 13676,14943 |
1 nation electronics llc
CAGE Code: 1XP36 |
|
3 wire group inc
CAGE Code: 4X0B1,7VME3 |
184th air refueling wing
CAGE Code: 3EP27 |
|
5dt inc
CAGE Code: 3BPF1 |
3 m federal systems dept
CAGE Code: 68352 |
|
4 seasons counting systems inc
CAGE Code: 0MHX5 |
| Part Number : MS35250-11 | Manufacturer : Crescent Manufacturing Company | ||
| NSN Number : 5305-00-078-0140 (5305000780140) | |||
| Item Name : Screw Machine | CAGE Code : 63020 | ||
| NIIN : 000780140 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number MS35250-11, that of which is listed with the description Screw Machine; Manufactured by Crescent Manufacturing Company and listed alongside the NSN 5305000780140, part number MS35250-11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-078-0140 Item PartTypeName: SCREW,MACHINE | 5305 | 000780140 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| A105B2114 | 2 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.437 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 0.437 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.130 INCHES MINIMUM AND 0.146 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.073 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 72 |
| CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 2S STYLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
