| Part Number : 1N6-17 | Manufacturer : Cresta Blanca Wine Co Inc | ||
| NSN : 5310-00-215-7624 (5310002157624) | |||
| Item Name : Nut Plain Round | CAGE Code : 88313 | ||
| NIIN : 00-215-7624 (002157624) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 15887 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 1N617 | |||
Thank you for taking an interest in part number 1N6-17, that of which is listed with the description Nut Plain Round; Manufactured by Cresta Blanca Wine Co Inc and listed alongside the NSN 5310002157624, part number 1N6-17 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1N6-17 | Manufacturer : Cresta Blanca Wine Co Inc | ||
| NSN Number : 5310-00-215-7624 (5310002157624) | |||
| Item Name : Nut Plain Round | CAGE Code : 88313 | ||
| NIIN : 002157624 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number 1N6-17, that of which is listed with the description Nut Plain Round; Manufactured by Cresta Blanca Wine Co Inc and listed alongside the NSN 5310002157624, part number 1N6-17 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-215-7624 Item PartTypeName: NUT,PLAIN,ROUND | 5310 | 002157624 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1N6-17 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAWY | COUNTERBORE DIAMETER | 1.0024 INCHES MINIMUM NUT AND 1.0105 INCHES MAXIMUM NUT |
| ABQU | DRIVE POINT DEPTH | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ACTA | NUT STYLE | ROUND |
| ACTD | NUT DIAMETER | 1.547 INCHES MINIMUM AND 1.577 INCHES MAXIMUM |
| ADBG | NUT THICKNESS | 0.250 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| ADBH | DRIVE POINT WIDTH | 0.156 NOMINAL MILS AND 0.188 NOMINAL CENTIMETERS |
| ADBM | DRIVE POINT QUANTITY | 2 |
| AGGP | DRILLED HOLE DIAMETER | 0.070 INCHES NOMINAL |
| ALET | HOLE TYPE AND QUANTITY | 2 DRILLED |
| BZRR | THREAD SERIES | UNEF |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION J |
| CRSQ | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT |
| MATT | MATERIAL | ALUMINUM ALLOY 2014 OVERALL OR ALUMINUM ALLOY 2024 OVERALL OR ALUMINUM ALLOY 2017 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/2 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-A-225/4 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-A-200/3 FED SPEC 2ND MATERIAL RESPONSE OVERALL OR QQ-A-225/6 FED SPEC 2ND MATERIAL RESPONSE OVERALL OR QQ-A-225/5 FED SPEC 3RD MATE |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-A-696 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
