| Part Number : WP100 | Manufacturer : Cts Corp | ||
| NSN : 5905-00-833-3098 (5905008333098) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 58756 | ||
| NIIN : 00-833-3098 (008333098) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number WP100, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Cts Corp and listed alongside the NSN 5905008333098, part number WP100 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : WP100 | Manufacturer : Cts Corp | ||
| NSN Number : 5905-00-833-3098 (5905008333098) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 58756 | ||
| NIIN : 008333098 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number WP100, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Cts Corp and listed alongside the NSN 5905008333098, part number WP100 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-833-3098 Item Description: Resistor Variable Wire Wound Non | 5905 | 008333098 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| WP100 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AEDX | SHAFT STYLE | ROUND |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | 1.250 INCHES NOMINAL |
| AAPN | SECTION QUANTITY | 1 |
| ABXF | SHAFT LENGTH | 2.969 INCHES MINIMUM AND 3.031 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFN | NONTURN DEVICE LOCATION | AT 3 OCLOCK AND AT 9 OCLOCK |
| AEFP | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.249 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| ADAQ | BODY LENGTH | 0.719 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 100.0 OHMS SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
