| Part Number : G9BD6 | Manufacturer : Curtiss Wright Controls Inc | ||
| NSN : 3020-00-252-1607 (3020002521607) | |||
| Item Name : Gear Spur | CAGE Code : 0AHP5 | ||
| NIIN : 00-252-1607 (002521607) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05466 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number G9BD6, that of which is listed with the description Gear Spur; Manufactured by Curtiss Wright Controls Inc and listed alongside the NSN 3020002521607, part number G9BD6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : G9BD6 | Manufacturer : Curtiss Wright Controls Inc | ||
| NSN Number : 3020-00-252-1607 (3020002521607) | |||
| Item Name : Gear Spur | CAGE Code : 0AHP5 | ||
| NIIN : 002521607 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number G9BD6, that of which is listed with the description Gear Spur; Manufactured by Curtiss Wright Controls Inc and listed alongside the NSN 3020002521607, part number G9BD6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-252-1607 Item PartTypeName: GEAR,SPUR | 3020 | 002521607 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| B21-00546 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| AGJS | PITCH DIAMETER | 1.8050 INCHES MINIMUM AND 1.8060 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 29 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM HUB |
| CQFM | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM TEETH |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.938 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 0.501 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.188 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.312 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.355 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.096 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.328 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 0.875 INCHES FIRST END |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,CLASS B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
