| Part Number : 178555-2 | Manufacturer : Curtiss Wright Controls Inc | ||
| NSN : 5305-00-156-2937 (5305001562937) | |||
| Item Name : Screw Machine | CAGE Code : 71791 | ||
| NIIN : 00-156-2937 (001562937) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 1785552 | |||
Thank you for taking an interest in part number 178555-2, that of which is listed with the description Screw Machine; Manufactured by Curtiss Wright Controls Inc and listed alongside the NSN 5305001562937, part number 178555-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 178555-2 | Manufacturer : Curtiss Wright Controls Inc | ||
| NSN Number : 5305-00-156-2937 (5305001562937) | |||
| Item Name : Screw Machine | CAGE Code : 71791 | ||
| NIIN : 001562937 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 178555-2, that of which is listed with the description Screw Machine; Manufactured by Curtiss Wright Controls Inc and listed alongside the NSN 5305001562937, part number 178555-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-156-2937 Item PartTypeName: SCREW,MACHINE | 5305 | 001562937 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| FFS92 | 2 | 1 | 4 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.087 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| AASL | HEAD DIAMETER | 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.058 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AGAV | END ITEM IDENTIFICATION | W/S: HELICOPTER,MH-53E; TRAINER,B-1B AIRCRAFT; GENERATOR,60KW,DIESEL,MILITARY STANDARD FAMILY; AIRCRAFT,C-2A (REPROCURED); RADAR SET,LIGHTWEIGHT 3D (AN/TPS-59); GENERATOR 30KW,DIESEL,MILITARY STANDARD FAMILY; AIRCRAFT,PROWLER EA-6 |
| AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OR ASTMA108 ASSN STD SINGLE MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OR MIL-C-81562 TYPE 2 CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 2C STYLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
