| Part Number : 178554-6 | Manufacturer : Curtiss Wright Controls Inc | ||
| NSN : 5305-00-614-0245 (5305006140245) | |||
| Item Name : Screw Machine | CAGE Code : 71791 | ||
| NIIN : 00-614-0245 (006140245) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 1785546 | |||
Thank you for taking an interest in part number 178554-6, that of which is listed with the description Screw Machine; Manufactured by Curtiss Wright Controls Inc and listed alongside the NSN 5305006140245, part number 178554-6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3g shielding specialties lp
CAGE Code: 7PCU6 |
21st century electronics inc
CAGE Code: 60092 |
|
2415779 ontario inc
CAGE Code: L09L7 |
5dt inc
CAGE Code: 3BPF1 |
|
3m france
CAGE Code: F0347 |
3m singapore pte ltd
CAGE Code: QA095 |
|
3 dimensional engineering inc
CAGE Code: 1HLX4 |
5 prime 3 prime inc
CAGE Code: 1B2Z0 |
|
498 msug
CAGE Code: 5VW08 |
3gen corporation
CAGE Code: 3SPS3 |
|
3m nederland b v
CAGE Code: H1248 |
12 volt shop
CAGE Code: Z0JM2 |
|
2h energy
CAGE Code: F1797 |
101communications inc
CAGE Code: 1WS16 |
|
2709th af vehicle control group
CAGE Code: 10994 |
| Part Number : 178554-6 | Manufacturer : Curtiss Wright Controls Inc | ||
| NSN Number : 5305-00-614-0245 (5305006140245) | |||
| Item Name : Screw Machine | CAGE Code : 71791 | ||
| NIIN : 006140245 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 178554-6, that of which is listed with the description Screw Machine; Manufactured by Curtiss Wright Controls Inc and listed alongside the NSN 5305006140245, part number 178554-6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-614-0245 Item PartTypeName: SCREW,MACHINE | 5305 | 006140245 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5305009140245 | 3 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.542 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.625 INCHES NOMINAL |
| AASK | HEAD STYLE | FILLISTER |
| AASL | HEAD DIAMETER | 0.292 INCHES MINIMUM AND 0.296 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.046 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ASXK | HOLE QUANTITY | 1 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH |
| CYAU | SCREW MATERIAL | STEEL |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
| CYBG | HEAD HOLE CONFIGURATION STYLE | ROUND LONGITUDINAL HOLE |
| THSD | THREAD SERIES DESIGNATOR | UNC |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
