| Part Number : 232285Y34 | Manufacturer : Curtiss Wright Controls Inc | ||
| NSN : 5306-00-415-1882 (5306004151882) | |||
| Item Name : Bolt Externally Relieved Body | CAGE Code : 0AHP5 | ||
| NIIN : 00-415-1882 (004151882) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06675 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 232285Y34, that of which is listed with the description Bolt Externally Relieved Body; Manufactured by Curtiss Wright Controls Inc and listed alongside the NSN 5306004151882, part number 232285Y34 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 232285Y34 | Manufacturer : Curtiss Wright Controls Inc | ||
| NSN Number : 5306-00-415-1882 (5306004151882) | |||
| Item Name : Bolt Externally Relieved Body | CAGE Code : 0AHP5 | ||
| NIIN : 004151882 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number 232285Y34, that of which is listed with the description Bolt Externally Relieved Body; Manufactured by Curtiss Wright Controls Inc and listed alongside the NSN 5306004151882, part number 232285Y34 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-415-1882 Item PartTypeName: BOLT,EXTERNALLY RELIEVED BODY | 5306 | 004151882 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 232285Y34 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | Thread Class | 3A |
| CQFM | Hardness Rating | 32.0 ROCKWELL C MINIMUM AND |
| MATT | Material | STEEL COMP 8740 OVERALL |
| AAWC | First Diameter From Head | 0.5150 INCHES MAXIMUM |
| AAWJ | Distance From Largest Bearing Surface Of Head To End Of Second Diameter | 1.110 INCHES MAXIMUM |
| AASB | Fastener Length | 1.650 INCHES MAXIMUM |
| AASA | Thread Length | 0.580 INCHES MAXIMUM |
| AATB | Width Between Flats | 0.530 INCHES NOMINAL |
| AASU | Head Height | 0.390 INCHES MINIMUM AND |
| CMLP | Thread Quantity Per Inch | 20 |
| TEST | Test Data Document | 81343-MS2640 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THSD | Thread Series Designator | UNF |
| FEAT | Special Features | OUTER EDGE OF ONE WRENCH FLAT CHAMFERED 45 DEG TO A DEPTH OF 0.220 IN. MIN,0.240 IN. MAX |
| SR-5 | Design Control Reference Or Manufacturers Code | |
| SFTT | Surface Treatment | CADMIUM OVERALL |
| AAWH | Distance From Largest Bearing Surface Of Head To End Of First Diameter | 0.740 INCHES MAXIMUM |
| AASL | Head Diameter | 0.880 INCHES NOMINAL |
| AAWD | Second Diameter From Head | 0.360 INCHES NOMINAL |
| CQFM | Hardness Rating | 36.0 ROCKWELL C MAXIMUM OVERALL |
| SR-5 | Design Control Reference Or Manufacturers Code | 232285Y34 |
| MRC | Decoded Requirement | Clear Text Reply |
| CSNG | Externally Relieved Body Diameter Quantity | 2 |
| AASA | Thread Length | 0.560 INCHES MINIMUM AND |
| AASU | Head Height | 0.400 INCHES MAXIMUM |
| AAJF | Thread Direction | RIGHT-HAND |
| AASK | Head Style | ROUND W/WRENCH FLATS CHAMFERED |
| SR-5 | Design Control Reference Or Manufacturers Code | 0AHP5 |
| MDCL | Material Document And Classification | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAWC | First Diameter From Head | 0.5145 INCHES MINIMUM AND |
| AAWJ | Distance From Largest Bearing Surface Of Head To End Of Second Diameter | 1.100 INCHES MINIMUM AND |
| STDC | Surface Treatment Document And Classification | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| CRTL | Criticality Code Justification | AAWC |
| AASB | Fastener Length | 1.640 INCHES MINIMUM AND |
| AAWH | Distance From Largest Bearing Surface Of Head To End Of First Diameter | 0.730 INCHES MINIMUM AND |
| AHYM | Nominal Thread Diameter | 0.438 INCHES |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
