| Part Number : 28014 | Manufacturer : Curtiss Wright Controls Inc | ||
| NSN : 5306-00-514-9108 (5306005149108) | |||
| Item Name : Bolt Externally Relieved Body | CAGE Code : 0AHP5 | ||
| NIIN : 00-514-9108 (005149108) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06675 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 28014, that of which is listed with the description Bolt Externally Relieved Body; Manufactured by Curtiss Wright Controls Inc and listed alongside the NSN 5306005149108, part number 28014 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 28014 | Manufacturer : Curtiss Wright Controls Inc | ||
| NSN Number : 5306-00-514-9108 (5306005149108) | |||
| Item Name : Bolt Externally Relieved Body | CAGE Code : 0AHP5 | ||
| NIIN : 005149108 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number 28014, that of which is listed with the description Bolt Externally Relieved Body; Manufactured by Curtiss Wright Controls Inc and listed alongside the NSN 5306005149108, part number 28014 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-514-9108 Item PartTypeName: BOLT,EXTERNALLY RELIEVED BODY | 5306 | 005149108 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 200439 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.594 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.984 INCHES NOMINAL |
| AASM | BOTTOM COUNTERSINK DIAMETER | 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.188 INCHES NOMINAL |
| AATB | WIDTH BETWEEN FLATS | 0.312 INCHES NOMINAL |
| AAWC | FIRST DIAMETER FROM HEAD | 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.390 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| FEAT | SPECIAL FEATURES | THD PITCH DIA MUST BE CONCENTRIC,SQUARE AND TRUE TO BODY WITHIN 0.006 AND TO TAPER WITHIN 0.004 FULL INDICATOR READINGS WHEN MTD ON CENTERS OR EQUIVALENT |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6317 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
