| Part Number : 124D302 | Manufacturer : Curtiss Wright Controls Inc | ||
| NSN : 5310-00-612-2496 (5310006122496) | |||
| Item Name : Nut Plain Hexagon | CAGE Code : 0AHP5 | ||
| NIIN : 00-612-2496 (006122496) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01857 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 124D302, that of which is listed with the description Nut Plain Hexagon; Manufactured by Curtiss Wright Controls Inc and listed alongside the NSN 5310006122496, part number 124D302 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 124D302 | Manufacturer : Curtiss Wright Controls Inc | ||
| NSN Number : 5310-00-612-2496 (5310006122496) | |||
| Item Name : Nut Plain Hexagon | CAGE Code : 0AHP5 | ||
| NIIN : 006122496 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number 124D302, that of which is listed with the description Nut Plain Hexagon; Manufactured by Curtiss Wright Controls Inc and listed alongside the NSN 5310006122496, part number 124D302 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-612-2496 Item PartTypeName: NUT,PLAIN,HEXAGON | 5310 | 006122496 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 124D302 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | HEXAGON |
| ADEA | NUT HEIGHT | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AGGP | DRILLED HOLE DIAMETER | 0.070 INCHES NOMINAL |
| ALET | HOLE TYPE AND QUANTITY | 2 DRILLED |
| ASDB | WIDTH ACROSS FLATS | 1.177 INCHES MINIMUM AND 1.185 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNEF |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 1.000 INCHES |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
| CRSQ | COUNTERSINK ANGLE | 88.0 DEGREES MINIMUM NUT AND 92.0 DEGREES MAXIMUM NUT |
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| MATT | MATERIAL | STEEL COMP 1035 OVERALL OR STEEL COMP 1137 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1035 ASSN STD 1ST MATERIAL RESPONSE OVERALL OR SAE1137 ASSN STD 2ND MATERIAL RESPONSE OVERALL OR AMS 5024 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
