| Part Number : 181940-2 | Manufacturer : Curtiss Wright Controls Inc | ||
| NSN : 5310-01-133-0197 (5310011330197) | |||
| Item Name : Washer Flat | CAGE Code : 71791 | ||
| NIIN : 01-133-0197 (011330197) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 13393 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 1819402 | |||
Thank you for taking an interest in part number 181940-2, that of which is listed with the description Washer Flat; Manufactured by Curtiss Wright Controls Inc and listed alongside the NSN 5310011330197, part number 181940-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 181940-2 | Manufacturer : Curtiss Wright Controls Inc | ||
| NSN Number : 5310-01-133-0197 (5310011330197) | |||
| Item Name : Washer Flat | CAGE Code : 71791 | ||
| NIIN : 011330197 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number 181940-2, that of which is listed with the description Washer Flat; Manufactured by Curtiss Wright Controls Inc and listed alongside the NSN 5310011330197, part number 181940-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-01-133-0197 Item PartTypeName: WASHER,FLAT | 5310 | 011330197 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10109667 | 1 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| AAUB | HOLE DIAMETER | 0.835 INCHES MINIMUM AND 0.836 INCHES MAXIMUM |
| ABMW | PERIPHERAL SHAPE STYLE | ROUND |
| ABMX | CENTER HOLE SHAPE STYLE | ROUND |
| ABNM | THICKNESS | 0.192 INCHES MINIMUM AND 0.194 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 1.128 INCHES MINIMUM AND 1.132 INCHES MAXIMUM |
| CQZT | OUTSIDE LEFT CORNER CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| CRFT | OUTSIDE RIGHT CORNER CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES OUTER |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BOTTOM |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES TOP |
| MATT | MATERIAL | STEEL UNS K44220 OVERALL OR STEEL UNS K44315 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8844,CLASS 3,COND E MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
