| Part Number : 183196-3 | Manufacturer : Curtiss Wright Controls Inc | ||
| NSN : 5315-01-361-3457 (5315013613457) | |||
| Item Name : Pin Grooved Headless | CAGE Code : 71791 | ||
| NIIN : 01-361-3457 (013613457) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 02386 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 1831963 | |||
Thank you for taking an interest in part number 183196-3, that of which is listed with the description Pin Grooved Headless; Manufactured by Curtiss Wright Controls Inc and listed alongside the NSN 5315013613457, part number 183196-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 183196-3 | Manufacturer : Curtiss Wright Controls Inc | ||
| NSN Number : 5315-01-361-3457 (5315013613457) | |||
| Item Name : Pin Grooved Headless | CAGE Code : 71791 | ||
| NIIN : 013613457 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 183196-3, that of which is listed with the description Pin Grooved Headless; Manufactured by Curtiss Wright Controls Inc and listed alongside the NSN 5315013613457, part number 183196-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-361-3457 Item PartTypeName: PIN,GROOVED,HEADLESS | 5315 | 013613457 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 183196-3 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 0.830 INCHES MINIMUM AND 0.840 INCHES MAXIMUM |
| ABMZ | DIAMETER | 0.2587 INCHES MINIMUM AND 0.2591 INCHES MAXIMUM |
| ABNZ | EFFECTIVE LENGTH | 0.587 INCHES MINIMUM AND 0.603 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.031 INCHES MINIMUM AND 0.034 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 4340 OVERALL |
| AAGZ | FIRST END STYLE | CHAMFERED |
| ABPA | UNDERCUT DIAMETER | 0.2285 INCHES MINIMUM AND 0.2315 INCHES MAXIMUM |
| ABPD | SECOND UNDERCUT WIDTH | 0.031 INCHES MINIMUM AND 0.034 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| CRMG | FIRST END TAPER ANGLE | 42.5 DEGREES MINIMUM AND 47.5 DEGREES MAXIMUM |
| FEAT | SPECIAL FEATURES | SHOT PEEN PER MIL-S-13165 USE S-170 SIZE HARD SHOT (RC 55-65) TO AN INTENSITY OF .012-.015A. 200 PERCENT COVERAGE REQUIRED. 100 PERCENT COVERAGE TO BE DETERMINED BY VISUAL EXAMINATION AT 10 TIMES MAGNIFICATION. PEENING PROCEDURE MUST BE APP |
| STYL | STYLE DESIGNATOR | GROOVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
