| Part Number : 2174D37 | Manufacturer : Curtiss Wright Controls Inc | ||
| NSN : 5340-00-090-7928 (5340000907928) | |||
| Item Name : Clamp Loop | CAGE Code : 0AHP5 | ||
| NIIN : 00-090-7928 (000907928) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 2174D37, that of which is listed with the description Clamp Loop; Manufactured by Curtiss Wright Controls Inc and listed alongside the NSN 5340000907928, part number 2174D37 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 2174D37 | Manufacturer : Curtiss Wright Controls Inc | ||
| NSN Number : 5340-00-090-7928 (5340000907928) | |||
| Item Name : Clamp Loop | CAGE Code : 0AHP5 | ||
| NIIN : 000907928 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 2174D37, that of which is listed with the description Clamp Loop; Manufactured by Curtiss Wright Controls Inc and listed alongside the NSN 5340000907928, part number 2174D37 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-090-7928 Item PartTypeName: CLAMP,LOOP | 5340 | 000907928 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2174D37 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT AND OIL RESISTANT |
| ABMK | OVERALL WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| ABMZ | DIAMETER | 0.194 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.640 INCHES MINIMUM AND 0.702 INCHES MAXIMUM |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 0.665 INCHES MINIMUM AND 0.727 INCHES MAXIMUM |
| BZTN | LOOP INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 BAND |
| MATT | MATERIAL | RUBBER SYNTHETIC CUSHION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-362,ANNEALED FED SPEC SINGLE MATERIAL RESPONSE BAND |
| SFTT | SURFACE TREATMENT | ANODIZE BAND |
| STYL | STYLE DESIGNATOR | OFFSET MOUNT |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
