| Part Number : 69-30078 | Manufacturer : D J Engineering Inc | ||
| NSN : 5306-00-757-1241 (5306007571241) | |||
| Item Name : Bolt Internal Wrenching | CAGE Code : 0C7H8 | ||
| NIIN : 00-757-1241 (007571241) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06666 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 6930078 | |||
Thank you for taking an interest in part number 69-30078, that of which is listed with the description Bolt Internal Wrenching; Manufactured by D J Engineering Inc and listed alongside the NSN 5306007571241, part number 69-30078 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 69-30078 | Manufacturer : D J Engineering Inc | ||
| NSN Number : 5306-00-757-1241 (5306007571241) | |||
| Item Name : Bolt Internal Wrenching | CAGE Code : 0C7H8 | ||
| NIIN : 007571241 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number 69-30078, that of which is listed with the description Bolt Internal Wrenching; Manufactured by D J Engineering Inc and listed alongside the NSN 5306007571241, part number 69-30078 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-757-1241 Item PartTypeName: BOLT,INTERNAL WRENCHING | 5306 | 007571241 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 69-30078 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.030 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.570 INCHES NOMINAL |
| AASL | HEAD DIAMETER | 0.680 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.500 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.251 INCHES NOMINAL |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CRHC | HOLE CONFIGURATION STYLE | ROUND INTERNAL HEXAGON |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.470 INCHES NOMINAL FIRST HOLE |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES OVERALL |
| FEAT | SPECIAL FEATURES | THREE INSERT LONGITUDINAL SLOTS IN THREADED SEGMENT,0.059 IN. WIDE,SPACED 45.0 DEGREES APART |
| MATT | MATERIAL | STEEL COMP 4340 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE I CLASS C FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
