| Part Number : 13-7102 | Manufacturer : D R S Power And Control Technologies | ||
| NSN : 5315-01-151-9344 (5315011519344) | |||
| Item Name : Pin Shoulder Headless | CAGE Code : 3BFG7 | ||
| NIIN : 01-151-9344 (011519344) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16749 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 137102 | |||
Thank you for taking an interest in part number 13-7102, that of which is listed with the description Pin Shoulder Headless; Manufactured by D R S Power And Control Technologies and listed alongside the NSN 5315011519344, part number 13-7102 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 13-7102 | Manufacturer : D R S Power And Control Technologies | ||
| NSN Number : 5315-01-151-9344 (5315011519344) | |||
| Item Name : Pin Shoulder Headless | CAGE Code : 3BFG7 | ||
| NIIN : 011519344 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 13-7102, that of which is listed with the description Pin Shoulder Headless; Manufactured by D R S Power And Control Technologies and listed alongside the NSN 5315011519344, part number 13-7102 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-151-9344 Item PartTypeName: PIN,SHOULDER,HEADLESS | 5315 | 011519344 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 13-7102 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AAHP | SECOND END STYLE | SQUARE |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.720 INCHES MINIMUM AND 0.800 INCHES MAXIMUM |
| AATR | SHANK LENGTH | 1.270 INCHES MINIMUM AND 1.330 INCHES MAXIMUM |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | 0.438 INCHES NOMINAL |
| AAZE | SHANK DIAMETER | 0.250 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.500 INCHES MINIMUM AND 2.640 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.200 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES |
| CQTR | SECOND SHANK DIAMETER | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| CRDY | FIRST END LOCATION | UNTHREADED END |
| CRMG | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY |
| CWAS | SECOND SHANK LENGTH | 1.070 INCHES MINIMUM AND 1.130 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER PHILADELPHIA PRODUCTION STANDARD PO0307NRP |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SHOULDER |
| TEST | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AREFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
