| Part Number : MIL-S-10215 | Manufacturer : Daimler Chrysler | ||
| NSN : 6680-00-752-7479 (6680007527479) | |||
| Item Name : Shaft Assembly Flex | CAGE Code : 12204 | ||
| NIIN : 00-752-7479 (007527479) | |||
| FSC Code : 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments | |||
| FSG Code : 66 Instruments and Laboratory Equipment | |||
| INC Code : 20315 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: MILS10215 | |||
Thank you for taking an interest in part number MIL-S-10215, that of which is listed with the description Shaft Assembly Flex; Manufactured by Daimler Chrysler and listed alongside the NSN 6680007527479, part number MIL-S-10215 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MIL-S-10215 | Manufacturer : Daimler Chrysler | ||
| NSN Number : 6680-00-752-7479 (6680007527479) | |||
| Item Name : Shaft Assembly Flex | CAGE Code : 12204 | ||
| NIIN : 007527479 | |||
| FSC CODE : 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments | |||
Thank you for taking an interest in part number MIL-S-10215, that of which is listed with the description Shaft Assembly Flex; Manufactured by Daimler Chrysler and listed alongside the NSN 6680007527479, part number MIL-S-10215 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 101.313 INCHES NOMINAL |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| AJXJ | CORE MATERIAL | STEEL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS FIRST END UNF SECOND END |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS |
| BJPS | CASING MATERIAL | RUBBER AND STEEL |
| SR-1 | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M10215-1F113 |
| AKMF | CORE SURFACE TREATMENT | CADMIUM PLATED |
| CGDN | MINIMUM OPERATING RADIUS | 5.000 INCHES |
| CFRT | SWIVEL END | NOT PROVIDED BOTH ENDS |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| AECT | THREAD DEPTH | 0.327 INCHES NOMINAL FIRST END 0.375 INCHES NOMINAL SECOND END |
| ZZZV | III FSC APPLICATION DATA | TACHOMETER AND SPEEDOMETER DRIVE |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| ASDB | WIDTH ACROSS FLATS | 1.000 INCHES NOMINAL FIRST END 0.750 INCHES NOMINAL SECOND END |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-10215K |
| APTD | END TYPE | ROUND KEYED FIRST END SQUARE MALE SECOND END |
| CFRR | CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER OR RUBBER COVER |
| ABUJ | (NON-CORE DATA) THREAD SIZE | 7/8-18 5/8-18 |
| FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION |
| AEDN | TIP LENGTH | 1.018 INCHES MINIMUM AND 1.022 INCHES MAXIMUM FIRST END 0.950 INCHES MINIMUM AND 1.010 INCHES MAXIMUM SECOND END |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| CFRP | CASING LENGTH BETWEEN FERRULES | 100.000 INCHES NOMINAL |
| SR-1 | MANUFACTURERS CODE | 81349 |
| CFSM | (NON-CORE DATA) STRENGTH RATING CHARACTERISTICS | 15.0 POUNDS TORSION STRENGTH WINDING DIRECTION |
| CFRN | CASING SURFACE TREATMENT | ANY ACCEPTABLE |
| CFRQ | CASING OUTSIDE DIAMETER | 0.300 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| CFRX | OVERALL END SIZE | 1.188 IN. W 0.875 IN. W |
| CFRZ | CORE OVERALL LENGTH | 101.313 INCHES NOMINAL |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.150 INCHES MINIMUM DIAMETER AND 0.153 INCHES MAXIMUM DIAMETER FIRST END 0.101 INCHES MINIMUM ACROSS FLATS AND 0.104 INCHES MAXIMUM ACROSS FLATS SECOND END |
| AKMH | CORE DIAMETER | 0.150 INCHES NOMINAL |
| APJC | THREAD LOCATION | INTERNAL BOTH ENDS |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| AAJD | THREAD CLASS | 2B FIRST END 2B SECOND END |
| SR-1 | SPEC/STD CONTROLLING DATA |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
