| Part Number : 3 1-2-14-39 | Manufacturer : Dana Commercial Vehicle Products | ||
| NSN : 2520-00-374-9490 (2520003749490) | |||
| Item Name : Cap Dust Propeller Shaft | CAGE Code : 72447 | ||
| NIIN : 00-374-9490 (003749490) | |||
| FSC Code : 2520 Vehicular Power Transmission Components | |||
| FSG Code : 25 Vehicular Equipment Components | |||
| INC Code : 10960 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 3121439 | |||
Thank you for taking an interest in part number 3 1-2-14-39, that of which is listed with the description Cap Dust Propeller Shaft; Manufactured by Dana Commercial Vehicle Products and listed alongside the NSN 2520003749490, part number 3 1-2-14-39 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
485 engineering installation group
CAGE Code: 13676,14943 |
3m deutschland gmbh
CAGE Code: D2607 |
|
21st century enterprises inc
CAGE Code: 56589 |
3m singapore pte ltd
CAGE Code: QA095 |
|
3m unitek corporation
CAGE Code: 90444 |
400hz repair
CAGE Code: 03MS6 |
|
2 s 2 inc
CAGE Code: 5A8X0,787R6 |
4fastplumber llc
CAGE Code: 4P0W6 |
|
3nity products llc
CAGE Code: 8HDM8 |
28eme groupe geographique
CAGE Code: FAR17 |
|
3m co admininistrative electronic
CAGE Code: 20999 |
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
|
4 m company inc
CAGE Code: 1K407,57268 |
2 mb distribution
CAGE Code: FAH01 |
|
3m company health care mfg
CAGE Code: 04515 |
| Part Number : 3 1-2-14-39 | Manufacturer : Dana Commercial Vehicle Products | ||
| NSN Number : 2520-00-374-9490 (2520003749490) | |||
| Item Name : Cap Dust Propeller Shaft | CAGE Code : 72447 | ||
| NIIN : 003749490 | |||
| FSC CODE : 2520 Vehicular Power Transmission Components | |||
Thank you for taking an interest in part number 3 1-2-14-39, that of which is listed with the description Cap Dust Propeller Shaft; Manufactured by Dana Commercial Vehicle Products and listed alongside the NSN 2520003749490, part number 3 1-2-14-39 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-00-374-9490 Item PartTypeName: CAP,DUST,PROPELLER SHAFT | 2520 | 003749490 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3-1-2-1439 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | INSIDE DIAMETER | 1.774 INCHES MINIMUM AND 1.779 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.500 INCHES NOMINAL |
| ABKV | OUTSIDE DIAMETER | 1.8696 INCHES MINIMUM AND 1.8746 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| ABUJ | THREAD SIZE | 1-13/16-24 |
| ADCQ | PLAIN HOLE DIAMETER | 1.520 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | PROPELLER SHAFT,2-1/2 TON TRUCK |
| FEAT | SPECIAL FEATURES | R.H.THD;GRIPPING SURFACE CONDITION-KNURLED;MATL THK 1.520/1.530 IN.;SCREW THD SERIES DESIGNATOR-NS |
| MATT | MATERIAL | STEEL |
| STYL | STYLE DESIGNATOR | SCREW ON |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
